3D Printing InfoPrinter comparison
FlashForge AD5X vs Stratasys F120
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge AD5X comparisonsMore Stratasys F120 comparisons
| Property | FlashForge AD5XCOREXY | Stratasys F120INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Stratasys |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing"[1][2] | Stratasys F120, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame[1][4][5][6] | The F120 is the odd one out in the series: smaller cabinet (889 x 870 x 721 mm, 124 kg vs 1,626 x 864 x 711 mm, 227 kg), two external material coil boxes rather than internal spool bays, only two model materials, and no 0.127 mm layer option. Same build size as the F170 but not the same machine[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][4] | 254 x 254 x 254 mm (10 x 10 x 10 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 889 x 870 x 721 mm (35 x 35 x 29 in)[3] |
| Net weight (kg) | Not documented | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Not documented | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted[1][5] | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[5] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing[1][4] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS)[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1][4] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional[1][4] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C claimed[1][4] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet[1][4] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named[1][4] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1][4] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi[1][4] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published[1][4] | Not documented |
| Materials Support | ||
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF[1][4] | ABS-M30 and ASA, with SR-30 support material. Notably the F120 does NOT get PLA, FDM TPU 92A or ABS-CF10, and cannot use the 0.127 mm layer height[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- FlashForge AD5X technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor