3D Printing InfoPrinter comparison
FlashForge AD5X vs FlashForge Creator 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge AD5X comparisonsMore FlashForge Creator 4 comparisons
| Property | FlashForge AD5XCOREXY | FlashForge Creator 4IDEX |
|---|---|---|
| Identity | ||
| Brand | FlashForge | FlashForge |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge AD5X, sold as "AD5X - Multicolor 3D Printer for High-Speed, Full-Color Printing"[1][2] | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[3] |
| Street price (USD; dated snapshot per entry) | $399.00 sale against a $549.00 compare-at price on flashforge.com, in stock, with a further $50 off at checkout, checked Aug 2026. A refurbished AD5X is listed at $315.00[1][2] | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 220 mm Adventurer chassis with the 5M and 5M Pro but differs on the points that matter: 300 °C nozzle (vs 280 °C), 4-colour IFS unit, NO air filtration, NO auto shutdown, and a 300 mm/s print speed against a 600 mm/s travel speed. 3DJake and eolasprints both describe it as open-frame[1][4][5][6] | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][4] | 400 x 350 x 500 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[3] |
| Net weight (kg) | Not documented | 90 kg net[3] |
| Frame construction & material | Not documented | Fully enclosed professional chassis on a stand[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure and no air filtration — FlashForge's own table records "Air Filtration: No". Chamber lighting and remote monitoring are listed as expandable options rather than fitted[1][5] | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively controlled (manufacturer claim)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[5] | IDEX — two independently driven extruders on the same gantry[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | FlashForge publishes two separate figures: max travel speed 600 mm/s and max print speed 300 mm/s. The 300 mm/s print figure is the one that describes printing[1][4] | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[3] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder, fed by the 4-colour Intelligent Filament System (IFS)[1] | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C claimed[1][4] | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.25, 0.6 and 0.8 mm optional[1][4] | 0.4 mm default; 0.6 and 0.8 mm optional[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C claimed[1][4] | 130 °C maximum (manufacturer claim)[3] |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible spring-steel sheet[1][4] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; probe technology not named[1][4] | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1][4] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Two spool bays, 1 kg and 2 kg capacity[3] |
| Multi-material/multi-color capability or official upgrade path | Four-colour printing via the integrated Intelligent Filament System (IFS), which handles filament switching[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[3] |
| Total rated power draw | Not documented | 2320 W rated[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge; the supported slicers are Orca-Flashforge and OrcaSlicer[1] | Not named; the supported slicer is FlashPrint[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 7-inch touchscreen, 1024 x 600[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi[1][4] | USB flash drive, Ethernet, Wi-Fi[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-outage recovery supported; mechanism not published[1][4] | Not documented |
| Materials Support | ||
| Officially supported filament list | PETG, PLA, TPU95A, TPU64D-75D, PLA-CF, PETG-CF[1][4] | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 12 months on the printer, 3 months on extruder parts[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- FlashForge AD5X technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor