3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs VzBoT AWD 330
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore VzBoT AWD 330 comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | VzBoT AWD 330COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | VzBoT |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | VzBoT AWD 330, also written Vz330. Sold as "DIY VzBoT AWD 330 VZ330 3D Printer Kit" by Mellow[3] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | $1,360.00 at Mellow, available and shipping from China, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][4][5][2] | Ordered by colour (black or silver) and mains voltage (110 V or 220 V). Mellow describes the kit as a test version that still requires the buyer to print some components, and the 5-inch DSI screen requires a host computer that supports DSI — neither is included[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][6] | 330 x 330 x 400 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][6] | 530 x 500 x 720 mm body dimensions[3] |
| Net weight (kg) | Not documented | 31 kg net, 36 kg gross[3] |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | CNC-machined all-metal frame with carbon-rod components[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][6] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][7] | CoreXY in an AWD (all-wheel drive) arrangement — two motors on X and two on Y, four in total for the XY plane, each on its own external driver[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | LDO 9 mm rail on X; LDO 12 mm dual rails on Y; 10 mm optical shafts on Z[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Four external TMC5160 drivers for the LDO XY motors[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][6] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][6] | Lightweight all-metal direct drive with a twill drive wheel[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | VZ High Speed hotend[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][6] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][6] | 120 °C maximum bed temperature (manufacturer claim)[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 750 W silicone bed heater on an 8 mm aluminium plate[3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][6] | 8 mm aluminium plate with a magnetic spring-steel PEI-coated sheet[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][6] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard, quoted by Mellow at 550 Hz. Exact board model not named on the listing[3] |
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][6] | Not documented |
| Total rated power draw | 350 W rated[1][6] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper or RepRapFirmware[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][6] | 5-inch DSI display; requires a compatible host computer, which is not included[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][6] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the buyer[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- VzBoT AWD 330 kit (Mellow) 3dmellow.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review