3D Printing InfoPrinter comparison
FlashForge Adventurer 5M Pro vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Adventurer 5M Pro comparisonsMore Voron 0.2 comparisons
| Property | FlashForge Adventurer 5M ProCOREXY | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[1][2] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[3][4] |
| Street price (USD; dated snapshot per entry) | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[1][2] | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[1][5][6][2] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 220 mm advertised[1][7] | 120 x 120 x 120 mm[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 380 x 400 x 453 mm excluding the spool holder[1][7] | Not documented |
| Frame construction & material | All-metal CoreXY structure (FlashForge writes it "CoXY")[1] | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[1][7] | Enclosed by acrylic panels in the LDO kit[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][8] | CoreXY with the build plate moving in Z[3][4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[1][7] | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[4] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1][7] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, one extruder[1][7] | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[3][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 280 °C claimed[1][7] | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[4] |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[1][7] | 110 °C (Formbot kit listing)[4] |
| Bed surface (material, texture, coating), single/double-sided | Flexible removable PEI-coated spring-steel plate[1][7] | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; FlashForge does not name the probe technology on the product page[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Internal plus external circulation with a HEPA and activated-carbon filter[1][7] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[3][4] |
| Input voltage (110/220 V, switch or auto) | AC 100-120 V / 200-240 V, 50/60 Hz[1][7] | Not documented |
| Total rated power draw | 350 W rated[1][7] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch screen[1][7] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1][7] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera monitoring listed; resolution and framerate not published[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[3][4] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery, plus automatic shutdown[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review