3D Printing InfoPrinter comparison
ELEGOO OrangeStorm Giga vs Sovol SV07
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO OrangeStorm Giga comparisonsMore Sovol SV07 comparisons
| Property | ELEGOO OrangeStorm GigaINDUSTRIAL | Sovol SV07BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Sovol |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO OrangeStorm Giga[1] | Sovol SV07[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[4] | $299 at 3D Printers Online Store but Out of Stock, checked Aug 2026. Sovol's own comparison article quotes $259. No in-stock listing found[3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[1][6] | Base of a two-model pair with the SV07 Plus (300x300x350, 600 W MeanWell PSU, 25-point levelling, adds USB Type-C). The SV07 has a 350 W MeanWell PSU. Both are quoted by Sovol at 500 mm/s and 300 °C, so PSU wattage and build volume are the reliable discriminators[5][3][7] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection. 3DJake shows it sold out and no longer stocked[8][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[1] | 220 x 220 x 250 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[1] | 460 x 457 x 625 mm[3] |
| Net weight (kg) | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[1] | 9.8 kg machine weight; 12.9 kg boxed[3] |
| Frame construction & material | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[1] | Open frame, supplied as an assembly kit[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame; 3DJake records "Heated chamber: No"[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[1] | Cartesian i3 bedslinger[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear guide on the X axis[1] | Not documented |
| Y-axis guide type | Linear guide on the Y axis[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Four lead screws with four linear guide rods[9] | Not documented |
| Belts (type, width, e.g. Gates?) | X/Y belts with knob-adjustable tensioners[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[9] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[1][9] | Conflicting manufacturer figures: Sovol's own comparison says up to 500 mm/s, 3DJake's feature text says up to 250 mm/s, and the retailer listing gives a 250-500 mm/s range. 500 is the headline claim, 250 the working figure[5][2][3] |
| Recommended/typical print speed | 150 mm/s recommended printing speed (manufacturer figure)[9] | Not documented |
| Max acceleration (claimed, mm/s²) | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[9] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[9] | All-metal dual-gear direct drive with a planetary gearbox[2][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[9] | All-metal hotend to 300 °C[2][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=300 °C claimed[2][3][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[1] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[1] | Reversible PEI build plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[9][10] | Automatic bed levelling over 25 points; probe technology not stated[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection and power-loss resume printing[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Triple-fan cooling (Sovol's description; fan sizes and duct design not published)[2][5] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[9] | Not documented |
| PSU (brand, wattage, rail voltage) | Not documented | 350 W MeanWell, 24 V, 115/230 V AC input[5][3] |
| Total rated power draw | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[1][9] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[9] | Klipper[2][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[9] | 5-inch touchscreen (Sovol markets it as a "5-inch HD Klipper screen")[2][5] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[9] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB and LAN file transfer[1] | Wi-Fi and USB Type-C[2][5][3] |
| Materials Support | ||
| Officially supported filament list | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[1][9] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[11] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- Sovol SV07 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV07 Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor