3D Printing InfoPrinter comparison
ELEGOO OrangeStorm Giga vs Snapmaker J1s
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO OrangeStorm Giga comparisonsMore Snapmaker J1s comparisons
| Property | ELEGOO OrangeStorm GigaINDUSTRIAL | Snapmaker J1sIDEX |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Snapmaker |
| Class | INDUSTRIAL | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO OrangeStorm Giga[1] | Snapmaker J1S High Speed IDEX 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[4] | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[1][5] | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[1] | 300 x 200 x 200 mm in default and backup modes[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[1] | 539 x 401 x 464 mm[2] |
| Net weight (kg) | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[1] | 25 kg net[2] |
| Frame construction & material | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[1] | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[1] | IDEX — two independently driven extruders[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear guide on the X axis[1] | Linear rails[3] |
| Y-axis guide type | Linear guide on the Y axis[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Four lead screws with four linear guide rods[6] | Not documented |
| Belts (type, width, e.g. Gates?) | X/Y belts with knob-adjustable tensioners[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[6] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[1][6] | 350 mm/s maximum (manufacturer claim)[3] |
| Recommended/typical print speed | 150 mm/s recommended printing speed (manufacturer figure)[6] | Not documented |
| Max acceleration (claimed, mm/s²) | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[6] | 10,000 mm/s2 maximum (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[6] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[6] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 300 °C maximum (manufacturer claim)[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[1] | 100 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[1] | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[6][7] | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection and power-loss resume printing[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[6] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[2] |
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[2] |
| Total rated power draw | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[1][6] | 400 W maximum output[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[6] | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[6] | 5-inch Android display, 1280 x 720[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB and LAN file transfer[1] | Wi-Fi, USB cable, USB flash drive[2] |
| Materials Support | ||
| Officially supported filament list | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[1][6] | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor