3D Printing InfoPrinter comparison
ELEGOO OrangeStorm Giga vs Formlabs Form 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO OrangeStorm Giga comparisonsMore Formlabs Form 4 comparisons
| Property | ELEGOO OrangeStorm GigaINDUSTRIAL | Formlabs Form 4RESIN |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Formlabs |
| Class | INDUSTRIAL | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO OrangeStorm Giga[1] | Formlabs Form 4 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[4] | Starting at $2,625.00 at GoEngineer, in stock, checked Aug 2026. Formlabs sells the printer as part of packages (Form 4 Complete Package etc.), so package prices are much higher than the printer-only figure[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[1][5] | Three machines share this platform and are constantly conflated. Form 4: 200 x 125 x 210 mm, 50 um pixels, 18.3 kg, 480 W, one resin cartridge, NOT biocompatible. Form 4B: identical hardware but validated for 38 Formlabs materials including 15 biocompatible. Form 4L: 353 x 196 x 350 mm, 46 um pixels, 58.5 kg, 900 W, two cartridges[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[1] | 200 x 125 x 210 mm (Formlabs quotes 5.25 litres)[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[1] | 398 x 367 x 554 mm[2][3] |
| Net weight (kg) | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[1] | 18.3 kg[2][3] |
| Frame construction & material | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed cabinet with a hinged UV-blocking cover. Operating temperature 18-28 C[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[1] | Masked stereolithography (MSLA). Formlabs brands the engine Low Force Display; straight-lift peel[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear guide on the X axis[1] | Not documented |
| Y-axis guide type | Linear guide on the Y axis[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Four lead screws with four linear guide rods[6] | Not documented |
| Belts (type, width, e.g. Gates?) | X/Y belts with knob-adjustable tensioners[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[6] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[1][6] | Not documented |
| Recommended/typical print speed | 150 mm/s recommended printing speed (manufacturer figure)[6] | Not documented |
| Max acceleration (claimed, mm/s²) | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[6] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[6] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[6][7] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection and power-loss resume printing[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[6] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 4.8 A, 50/60 Hz, 480 W[2] |
| Total rated power draw | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[1][6] | 480 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[6] | Proprietary. Print preparation is PreForm; fleet management is Formlabs Dashboard[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[6] | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB and LAN file transfer[1] | Dual-band Wi-Fi, Gigabit Ethernet (1000 Mbit), USB-C 2.0[2][3] |
| Materials Support | ||
| Officially supported filament list | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[1][6] | Formlabs resins across rigid, tough, general purpose, flame retardant, silicone, elastic, ceramic and castable families. Biocompatible resins require the Form 4B, not the Form 4[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XY dimensional tolerance +/-0.15% — a manufacturer specification, not an independent measurement[2][3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | Low Force Display masking LCD with a 50 um pixel size and pre-tuned anti-aliasing. Formlabs does not publish the screen diagonal or pixel count[2][3] |
| Light source | Not documented | Backlight unit with 60 uniform-wavelength high-power LEDs behind collimating lenses, with integrated cooling[2][3] |
| Vertical print speedmm/h | Not documented | Maximum 100 mm/h; average 40 mm/h at a 100 um layer height (manufacturer figures — GoEngineer publishes both, which is unusually explicit about the basis). Formlabs separately claims most prints finish in under 2 hours[3][2] |
| Layer height range | Not documented | 25-200 um per Formlabs' own tech-spec page; GoEngineer's listing for the same machine says 25-300 um. Unresolved[2][3] |
| Resin vat & feeding | Not documented | Single next-generation resin cartridge; Formlabs claims 5-10x faster filling and 63% less waste. Resin tank rated for 75,000+ layers with any Formlabs material. No vat capacity published[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Formlabs Form 4 3D printer listing store.goengineer.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor