3D Printing InfoPrinter comparison
ELEGOO Neptune 4 Max vs Positron V3.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 4 Max comparisonsMore Positron V3.2 comparisons
| Property | ELEGOO Neptune 4 MaxBEDSLINGER | Positron V3.2COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Positron3D |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 4 Max[1] | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $389.00 on us.elegoo.com, Aug 2026, against a compare-at price of $559.99; Ribbon-Cable and Type-C printhead variants are the same price[3] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest Neptune 4. The trade-off against the smaller models is easy to miss: the bed only reaches 85 C (against 100 C on the Plus and 110 C on the base Neptune 4) and acceleration is capped at 8000 mm/s2 (against 12000 and 20000), because of the mass of a 430 x 430 mm moving bed. Two printhead variants, Ribbon-Cable and Type-C, are sold under one SKU[1][4][5][3] | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 420 x 420 x 480 mm; printing platform 430 x 430 mm[1] | 180 x 180 x 165 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 658 x 632 x 740 mm; ELEGOO's maximum size for machine activity is 658 x 950 x 960 mm including rack and tray - allow nearly a metre of depth and height[1] | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[2] |
| Net weight (kg) | 18.1 kg net, 21.8 kg gross[1] | 3 kg net; 5.5 kg with the hard case[2] |
| Frame construction & material | CNC-machined aluminium extrusion frame[1] | Folding frame designed to fit in a filament box; supplied with a black hard case[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY, inverted — the machine prints upside down[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws with two tie rods[6] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[6] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim)[1] | 250 mm/s maximum print speed (manufacturer claim)[2] |
| Recommended/typical print speed | 250 mm/s recommended printing speed against the 500 mm/s ceiling (ELEGOO's own figure); default acceleration is 4000 mm/s2[6] | Not documented |
| Max acceleration (claimed, mm/s²) | 8000 mm/s2 max toolhead acceleration (manufacturer claim) - the lowest in the Neptune 4 family[1] | 8,000 mm/s2 (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[6] | Bowden-style, single extrusion[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[6] | PS plated-copper nozzle, 0.4 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 260 °C maximum (manufacturer claim)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Plated copper[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 85 C max heated bed temperature at 25 C ambient - well below the 100-110 C of the smaller Neptunes, which limits ABS/ASA work despite them being on the compatibility list[1] | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet, now upgraded to a dual-sided textured PEI + PLA-specific surface; platform 430 x 430 mm[6] | Heated removable ITO glass bed[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Manual levelling combined with 121-point auto-levelling[6] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection and power-loss resume printing[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[6] | LDO Positron mainboard[2] |
| PSU (brand, wattage, rail voltage) | Not documented | DC 24 V, 200 W[2] |
| Input voltage (110/220 V, switch or auto) | 100-120 V / 220-240 V, 50/60 Hz[1][6] | Not documented |
| Total rated power draw | 320 W rated power, 24 V output[6] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[6] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[6] | 3.5-inch LCD touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB and WLAN file transfer[1] | Wi-Fi, USB, Ethernet[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit, manufactured in China[2] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA, Nylon - but note the 85 C bed ceiling against ABS and ASA[1] | PLA and PETG only, per the manufacturer[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 65 dB or less - a manufacturer figure with no distance or method stated[6] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[7] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor