3D Printing InfoPrinter comparison
ELEGOO Neptune 3 Pro vs Rat Rig V-Core 4.1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 3 Pro comparisonsMore Rat Rig V-Core 4.1 comparisons
| Property | ELEGOO Neptune 3 ProBEDSLINGER | Rat Rig V-Core 4.1COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Rat Rig |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 3 Pro[1] | Rat Rig V-Core 4.1, described by Rat Rig as a large-format open CoreXY 3D printer kit[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 11 November 2022 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $259.99 on us.elegoo.com, Aug 2026, with the compare-at price also $259.99 - notably more than the newer and far faster Neptune 4 at $219[3][4] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The last Neptune 3 still listed; the 3 Plus and 3 Max are gone from the store's Neptune section. Do not read Neptune 4 figures onto it: the 3 Pro runs Marlin, not Klipper, tops out at 180 mm/s rather than 500, uses a 36-point mesh rather than 121-point, and its nozzle stops at 260 C rather than 300 C. Its machine size, 475 x 445 x 515 mm, is identical to the Neptune 4's, so body dimensions will not tell them apart[1][5][6] | Three sizes, all at the same base-kit price. Acceleration is the size-dependent figure and the one most often mis-quoted: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm. IDEX is a configuration option and changes the usable area per toolhead (copy mode 150x150x300 at the 300 size, mirror mode 95x95x300). Base kit excludes electronics. Rat Rig prices the base kit only in EUR (EUR 873.90 on sale from EUR 971.00, Aug 2026); no USD list price is published, so no USD street price is recorded here[2] |
| Market position: superseded? successor announced? | Superseded by the Neptune 4 series and, in ELEGOO's current marketing, by the Centauri line[6] | Current revision, replacing the V-Core 4; Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 machines[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 225 x 225 x 280 mm; printing platform 235 x 235 mm[1] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 475 x 445 x 515 mm - the same body as the Neptune 4. ELEGOO's maximum size for machine activity is 475 x 580 x 725 mm[1][5] | 623.2 x 583 x 785 mm (300); 723.2 x 683 x 885 mm (400); 823.2 x 783 x 985 mm (500). Sortable value is the 300 mm kit[2] |
| Net weight (kg) | 8.1 kg net, 10.15 kg gross[1] | Kit weight 35 kg (300), 45 kg (400), 55 kg (500)[2] |
| Frame construction & material | CNC-machined aluminium extrusion frame (Neptune family)[5] | 30-series aluminium extrusion; the 4.1 adds a steel X-axis gantry for rigidity[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame in the base kit[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY; Hybrid CoreXY and IDEX are configuration options[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-180 mm/s, with 60 mm/s given by ELEGOO as the recommended speed - a pre-Klipper machine, and the slowest in this file apart from the OrangeStorm Giga[1] | Not documented |
| Recommended/typical print speed | 60 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | Size-dependent: 15,000 mm/s2 at 300 mm, 12,000 at 400 mm, 8,000 at 500 mm (manufacturer claims)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[1] | Full-metal skeleton toolhead, new in the 4.1[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, titanium-alloy heat break[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C claimed max nozzle temperature - 40 C below the Neptune 4 series[1][5] | 350 °C maximum nozzle temperature (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm hardened steel and 0.6 mm included[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient[1] | 120 °C maximum heatbed temperature (manufacturer claim). The 400 and 500 sizes get 8 mm thick beds in the 4.1[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 36-point auto-levelling (the Neptune 4 family moved to 121 points)[1][7] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor and power-loss recovery[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Improved part cooling, listed by Rat Rig as one of the 4.1 changes[2] |
| Electronics & Power | ||
| Total rated power draw | 300 W rated power, 24 V output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - ELEGOO names the system "Marlin" for the Neptune 3 Pro, against "Klipper" for the whole Neptune 4 family[1][7] | RatOS 2.1 (Rat Rig's Klipper distribution)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TF (microSD) card and USB cable only - no LAN and no Wi-Fi[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; the 4.1 ships pre-made cables that need no crimping, with rewritten step-by-step build documentation[2] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA - no Nylon, unlike the Neptune 4 family[1][5] | PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 48 dB or less - a manufacturer figure with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- ELEGOO Neptune 3 Pro Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor