3D Printing InfoPrinter comparison
ELEGOO Neptune 3 Pro vs Rat Rig V-Core 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 3 Pro comparisonsMore Rat Rig V-Core 4 comparisons
| Property | ELEGOO Neptune 3 ProBEDSLINGER | Rat Rig V-Core 4COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Rat Rig |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 3 Pro[1] | Rat Rig V-Core 4, sold in the US as "RatRig V-Core 4 3D Printer Kit"[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 11 November 2022 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $259.99 on us.elegoo.com, Aug 2026, with the compare-at price also $259.99 - notably more than the newer and far faster Neptune 4 at $219[3][4] | $2,319.99 at Fabreeko for the fully-specified US kit (price includes shipping and duty in the continental USA), Batch 4, checked Aug 2026. 300 mm ABS-parts variant in stock, 400 mm down to one unit. Rat Rig's own base kit is priced separately in EUR[2][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The last Neptune 3 still listed; the 3 Plus and 3 Max are gone from the store's Neptune section. Do not read Neptune 4 figures onto it: the 3 Pro runs Marlin, not Klipper, tops out at 180 mm/s rather than 500, uses a 36-point mesh rather than 121-point, and its nozzle stops at 260 C rather than 300 C. Its machine size, 475 x 445 x 515 mm, is identical to the Neptune 4's, so body dimensions will not tell them apart[1][6][7] | Three sizes (300, 400, 500 mm cubes) and three motion configurations: Standard CoreXY, Hybrid CoreXY (+$149.99, adds two motors to Y), and IDEX with two independent toolheads (+$450.00). Superseded by the V-Core 4.1. Raspberry Pi and enclosure panels are not included[2][5] |
| Market position: superseded? successor announced? | Superseded by the Neptune 4 series and, in ELEGOO's current marketing, by the Centauri line[7] | Superseded by the V-Core 4.1, which adds a steel X gantry, a full-metal toolhead, improved part cooling, 8 mm beds on the 400 and 500 sizes and pre-made cables. Rat Rig sells a 4.1 upgrade kit for existing V-Core 4 owners[5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 225 x 225 x 280 mm; printing platform 235 x 235 mm[1] | 300 x 300 x 300, 400 x 400 x 400 or 500 x 500 x 500 mm. Sortable value is the 300 mm kit[2][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 475 x 445 x 515 mm - the same body as the Neptune 4. ELEGOO's maximum size for machine activity is 475 x 580 x 725 mm[1][6] | Not documented |
| Net weight (kg) | 8.1 kg net, 10.15 kg gross[1] | Not documented |
| Frame construction & material | CNC-machined aluminium extrusion frame (Neptune family)[6] | 30-series aluminium extrusion with printed ABS structural parts[2][5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open by default; enclosure panels sold separately[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY, or Hybrid CoreXY, or Hybrid CoreXY IDEX depending on the configuration ordered[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-180 mm/s, with 60 mm/s given by ELEGOO as the recommended speed - a pre-Klipper machine, and the slowest in this file apart from the OrangeStorm Giga[1] | Not documented |
| Recommended/typical print speed | 60 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[1] | LDO Orbiter 2.0 direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, titanium-alloy heat break[1] | Phaetus Rapido 2.0 UHF[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C claimed max nozzle temperature - 40 C below the Neptune 4 series[1][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet[1] | Keenovo silicone bed heater[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 36-point auto-levelling (the Neptune 4 family moved to 121 points)[1][8] | Beacon eddy-current probe[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor and power-loss recovery[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Nidec 4028 part-cooling fan[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | BigTreeTech Octopus[2] |
| Total rated power draw | 300 W rated power, 24 V output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - ELEGOO names the system "Marlin" for the Neptune 3 Pro, against "Klipper" for the whole Neptune 4 family[1][8] | RatOS, Rat Rig's Klipper distribution[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TF (microSD) card and USB cable only - no LAN and no Wi-Fi[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; Raspberry Pi and enclosure panels sourced separately[2] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA - no Nylon, unlike the Neptune 4 family[1][6] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 48 dB or less - a manufacturer figure with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[9] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- RatRig V-Core 4 kit (US distributor listing) fabreeko.com · 2026-08 · vendor
- ELEGOO Neptune 3 Pro Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- Rat Rig V-Core 4.1 product page ratrig.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor