3D Printing InfoPrinter comparison
ELEGOO Neptune 3 Pro vs Original Prusa XL+ Dual-Head
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Neptune 3 Pro comparisonsMore Original Prusa XL+ Dual-Head comparisons
| Property | ELEGOO Neptune 3 ProBEDSLINGER | Original Prusa XL+ Dual-HeadTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Prusa Research |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Neptune 3 Pro[1] | Original Prusa XL+, Dual-Head variant ("Prusa XL+ Dual-Head" in the e-shop variant data)[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 11 November 2022 (Shopify publish date)[3] | The XL+ refresh was announced on 13 August 2026, on sale immediately in all toolhead configurations, with assembled printers shipping later in August 2026 and upgrade kits for existing XL owners from around the end of August. The original Original Prusa XL predates it[4] |
| Street price (USD; dated snapshot per entry) | $259.99 on us.elegoo.com, Aug 2026, with the compare-at price also $259.99 - notably more than the newer and far faster Neptune 4 at $219[3][5] | $2,768.52 on prusa3d.com, Aug 2026 (lowest listed price for the Dual-Head variant; the 2-toolhead Enclosure bundle starts at $3,128.70)[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The last Neptune 3 still listed; the 3 Plus and 3 Max are gone from the store's Neptune section. Do not read Neptune 4 figures onto it: the 3 Pro runs Marlin, not Klipper, tops out at 180 mm/s rather than 500, uses a 36-point mesh rather than 121-point, and its nozzle stops at 260 C rather than 300 C. Its machine size, 475 x 445 x 515 mm, is identical to the Neptune 4's, so body dimensions will not tell them apart[1][6][7] | One of three XL+ configurations - Single-Tool $2,128.70, Dual-Head $2,768.52, Five-Head $3,610.18 (Aug 2026). The frame, bed, electronics and 360 mm cube build volume are identical across all three; only the toolhead count, the price and the achievable multi-material workflow change. Toolheads can be added later[2][8] |
| Market position: superseded? successor announced? | Superseded by the Neptune 4 series and, in ELEGOO's current marketing, by the Centauri line[7] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 225 x 225 x 280 mm; printing platform 235 x 235 mm[1] | 360 x 360 x 360 mm, which Prusa states as 46.7 litres[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 475 x 445 x 515 mm - the same body as the Neptune 4. ELEGOO's maximum size for machine activity is 475 x 580 x 725 mm[1][6] | About 700 x 900 x 720 mm (Prusa's own figure is approximate)[2] |
| Net weight (kg) | 8.1 kg net, 10.15 kg gross[1] | About 30 kg[2] |
| Frame construction & material | CNC-machined aluminium extrusion frame (Neptune family)[6] | Aluminium extrusions and steel sheets (Prusa's comparison table for the XL)[9] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame. The Enclosure for Prusa XL+ is an optional add-on; Prusa says the printer is ready for chamber temperatures up to 60 C, that the new better-sealed enclosure reaches around 50 C on the printer's own waste heat, and that 60 C needs an upcoming chamber heater for which no shipping date has been given[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bed-slinger[1] | CoreXY with 1.5 mm GT belts, Input Shaper and Phase Stepping[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Two lead screws[1] | Not documented |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5 mm GT belts[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)"; no driver part number published[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-180 mm/s, with 60 mm/s given by ELEGOO as the recommended speed - a pre-Klipper machine, and the slowest in this file apart from the OrangeStorm Giga[1] | Not documented |
| Recommended/typical print speed | 60 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input Shaper and Phase Stepping[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with 2 fans[1] | Nextruder direct drive; each toolhead carries its own extruder, hotend, nozzle and filament[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle, 0.4 mm, titanium-alloy heat break[1] | Quick-swap nozzles - 0.25 mm for detail, 0.6/0.8 mm for speed, hardened steel for abrasives, high-flow CHT for throughput; toolheads ship with high-flow nozzles[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C claimed max nozzle temperature - 40 C below the Neptune 4 series[1][6] | 290 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max heated bed temperature at 25 C ambient[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI spring steel sheet[1] | Segmented heatbed of 16 individually controlled tiles across the 360 x 360 mm surface, so only the tiles under the part are powered; removable double-sided satin print sheet supplied[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 36-point auto-levelling (the Neptune 4 family moved to 121 points)[1][10] | Load-cell sensor - the nozzle is the probe, which Prusa says automatically accounts for nozzle changes, surface textures and thermal expansion and removes manual Z-offsets. Toolhead-to-toolhead alignment on the XL+ uses a separate permanently mounted eddy-current Tool Offset Sensor, replacing the removable mechanical pin used on the original XL[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor and power-loss recovery[1] | Filament sensors fitted; Prusa's comparison table lists two filament sensors for the XL[9] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Two independent toolheads with automatic tool changing - two materials or two nozzle sizes in one job, with no purge tower waste between materials because each head keeps its own nozzle[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | 360-degree part cooling on each toolhead, new on the XL+ and matching the MK4S and CORE One arrangement; Prusa states it delivers more airflow and distributes it more evenly around the nozzle. Additional fans and heatsinks cool the electronics. Fan sizes are not published[2][4] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy electronics with STM32 (Prusa's comparison table for the XL)[9] |
| Total rated power draw | 300 W rated power, 24 V output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - ELEGOO names the system "Marlin" for the Neptune 3 Pro, against "Klipper" for the whole Neptune 4 family[1][10] | Open-source firmware - Prusa states "Firmware: Open-source; ships with the full current Prusa feature set", and the XL is covered by the prusa3d/Prusa-Firmware-Buddy source tree[2][11] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[1] | 3.5-inch 65k-colour screen with touch control (Prusa's comparison table for the XL)[9] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[1] | On-device touch UI; Prusa Connect and the Prusa mobile app are optional - Prusa states the machine is fully offline capable[9][2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TF (microSD) card and USB cable only - no LAN and no Wi-Fi[1] | Ethernet, optional Wi-Fi; USB drive for print files. Prusa Connect optional and fully offline operation supported[2][9] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, ASA - no Nylon, unlike the Neptune 4 family[1][6] | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB and carbon-fibre composites. Prusa states an open material policy - any brand of 1.75 mm filament, no chips and no subscriptions[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[12][11] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 48 dB or less - a manufacturer figure with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[13] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[14][9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- Original Prusa XL+ product page (spec block and variant price data) prusa3d.com · 2026-08 · vendor
- ELEGOO Neptune 3 Pro Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc