3D Printing InfoPrinter comparison
ELEGOO Mars 5 vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 comparisonsMore Voron 0.2 comparisons
| Property | ELEGOO Mars 5RESIN | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Voron Design |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5. Elegoo's own product handle spells the configuration out: mars-5-4k-6-6inch-monochrome-lcd-resin-3d-printer[1][2][3] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[4][5] |
| Street price (USD; dated snapshot per entry) | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00[2][3] | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold beside the Mars 5 Ultra, which is a materially different machine: 7-inch 9K masking LCD vs 6.6-inch 4K, 18 um vs 35 um pixels, 150 vs 70 mm/h, a 4.0-inch capacitive control screen vs 3.5-inch resistive, and Wi-Fi (the plain Mars 5 is USB only). Elegoo lists ten further Mars 5 / Mars 5 Ultra bundle SKUs pairing the printers with Mercury wash-and-cure stations at $302-$432; those are not printer prices[1][6][2][3] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 143.43 x 89.6 x 150 mm[1] | 120 x 120 x 120 mm[4][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 230 x 230 x 433.5 mm[1] | Not documented |
| Net weight (kg) | Approximately 6.6 kg[1] | Not documented |
| Frame construction & material | Metal frame with adjustable foot pads[1] | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Enclosed by acrylic panels in the LDO kit[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA — UV LCD masked stereolithography. Single Z axis, build plate lifting straight out of the vat (no tilt-release on this model, unlike the Mars 5 Ultra)[1][6] | CoreXY with the build plate moving in Z[4][5] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[4][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C (Formbot kit listing)[5] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate with a quick-release design[1] | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click. An intelligent mechanical sensor detects resin residue to prevent LCD damage[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[4] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[4][5] |
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicers are Voxeldance Tango and CHITUBOX; STL and OBJ accepted[1] | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch resistive touchscreen (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB only — no Wi-Fi on this model[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[4][5] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. Elegoo does not publish a resin compatibility list on this listing[1] | Not documented |
| Safety | ||
| Firmware safety limits (max temp cutoffs — exact values) | Intelligent overheating protection stops printing above 80 °C[1] | Not documented |
| Resin & MSLA | ||
| Masking LCD | 6.6-inch 4K monochrome masking LCD, 4098 x 2560 px, XY pixel pitch 35 x 35 um (manufacturer specification)[1][3] | Not documented |
| Light source | COB LED at 405 nm. Elegoo does not publish an LED count or collimating optics for this model[1] | Not documented |
| Vertical print speedmm/h | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes[1] | Not documented |
| Release film | PFA film with a non-stick surface. No rated life published[1] | Not documented |
| Resin vat & feeding | Replaceable resin tank with two pouring openings and screw caps. An intelligent mechanical sensor detects resin residue in the vat. Capacity not published; no auto-refill[1] | Not documented |
| Fume extraction | None fitted. Elegoo states compatibility with the separately sold MARS MATE air purifier for odour reduction[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor