3D Printing InfoPrinter comparison
ELEGOO Mars 5 vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | ELEGOO Mars 5RESIN | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | LulzBot |
| Class | RESIN | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5. Elegoo's own product handle spells the configuration out: mars-5-4k-6-6inch-monochrome-lcd-resin-3d-printer[1][2][3] | LulzBot TAZ Pro Long Bed 3D Printer[4] |
| Street price (USD; dated snapshot per entry) | $179.00 on us.elegoo.com against a $225.00 compare-at price (20% off), in stock, checked Aug 2026. The live product feed shows the same $179.00[2][3] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold beside the Mars 5 Ultra, which is a materially different machine: 7-inch 9K masking LCD vs 6.6-inch 4K, 18 um vs 35 um pixels, 150 vs 70 mm/h, a 4.0-inch capacitive control screen vs 3.5-inch resistive, and Wi-Fi (the plain Mars 5 is USB only). Elegoo lists ten further Mars 5 / Mars 5 Ultra bundle SKUs pairing the printers with Mercury wash-and-cure stations at $302-$432; those are not printer prices[1][5][2][3] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 143.43 x 89.6 x 150 mm[1] | 282 x 582 x 285 mm[4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 230 x 230 x 433.5 mm[1] | Not documented |
| Net weight (kg) | Approximately 6.6 kg[1] | Not documented |
| Frame construction & material | Metal frame with adjustable foot pads[1] | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Open frame, no enclosure[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA — UV LCD masked stereolithography. Single Z axis, build plate lifting straight out of the vat (no tilt-release on this model, unlike the Mars 5 Ultra)[1][5] | Cartesian bedslinger[4] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[4] |
| Speed & Acceleration | ||
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Asteroid 285 tool head[4] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[4] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 °C maximum, firmware-limited[4] |
| Stock nozzle size & sizes included in box | Not documented | 1.2 mm GammaMaster steel[4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[4] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[4] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate with a quick-release design[1] | Blue spring-steel magnetic flex bed system[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click. An intelligent mechanical sensor detects resin residue to prevent LCD damage[1] | BLTouch, 32-point automatic mesh calibration[4] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with runout and stripping detection[4] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[4] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[4] |
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicers are Voxeldance Tango and CHITUBOX; STL and OBJ accepted[1] | Marlin[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch resistive touchscreen (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB only — no Wi-Fi on this model[1] | USB serial; 16 GB flash drive included for standalone printing[4] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. Elegoo does not publish a resin compatibility list on this listing[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[4] |
| Safety | ||
| Firmware safety limits (max temp cutoffs — exact values) | Intelligent overheating protection stops printing above 80 °C[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[4] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[4] |
| Resin & MSLA | ||
| Masking LCD | 6.6-inch 4K monochrome masking LCD, 4098 x 2560 px, XY pixel pitch 35 x 35 um (manufacturer specification)[1][3] | Not documented |
| Light source | COB LED at 405 nm. Elegoo does not publish an LED count or collimating optics for this model[1] | Not documented |
| Vertical print speedmm/h | 70 mm/h maximum (manufacturer claim). Elegoo does not state the layer height or resin type the figure assumes[1] | Not documented |
| Release film | PFA film with a non-stick surface. No rated life published[1] | Not documented |
| Resin vat & feeding | Replaceable resin tank with two pouring openings and screw caps. An intelligent mechanical sensor detects resin residue in the vat. Capacity not published; no auto-refill[1] | Not documented |
| Fume extraction | None fitted. Elegoo states compatibility with the separately sold MARS MATE air purifier for odour reduction[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor