3D Printing InfoPrinter comparison
ELEGOO Mars 5 Ultra vs QIDI X-Plus 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 Ultra comparisonsMore QIDI X-Plus 3 comparisons
| Property | ELEGOO Mars 5 UltraRESIN | QIDI X-Plus 3COREXY |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | QIDI |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5 Ultra. Elegoo's product handle is mars-5-ultra-9k-7inch-monochrome-lcd-resin-3d-printer[1][2][3] | QIDI X-Plus 3, listed in QIDI navigation as X-Plus3[4][5] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[4][5] |
| Street price (USD; dated snapshot per entry) | $269.00 in Elegoo's live US product feed, in stock, checked Aug 2026. The Mars 5 Series collection page rendered $259.00 against a $338.00 compare-at price on the same day, so the two Elegoo surfaces disagree by $10[3][2] | $699 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026. 3DJake lists the model as sold out[5][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not a trim of the Mars 5 — a different imaging stack and a different release mechanism: 7-inch 9K LCD and 18 um pixels vs 6.6-inch 4K and 35 um, 150 vs 70 mm/h, tilt-release vs straight lift, an AI camera, and Wi-Fi added. Seven bundle SKUs pair it with Mercury Plus V2.0/V3.0 or Mercury XS at $363-$432[6][1][2][3] | Two headline-speed figures circulate for this model: QIDI's own US page says 600 mm/s and 35 mm3/s, 3DJake's spec table says <=500 mm/s and 30 mm3/s. This is exactly the kind of sibling contamination the 3-series suffers (X-Max 3 is 600 mm/s / 35 mm3/s). Siblings: X-Max 3 (325x325x315, 900 W) and X-Smart 3 (175x180x170, no chamber heat, 300 °C)[4][5][7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 153.36 x 77.76 x 165 mm[1] | 280 x 280 x 270 mm advertised[4][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 260 x 268 x 451.5 mm[1] | 511 x 527 x 529 mm[4] |
| Net weight (kg) | Approximately 8.8 kg[1] | 24.3 kg net[4] |
| Frame construction & material | Not documented | All-metal frame per QIDI's US page; no further breakdown published[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Fully enclosed with a heated chamber[4][5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent chamber heating (manufacturer claim)[4][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA with tilt-release: the resin tank tilts after each layer to peel the part rather than pulling straight up. Single Z axis[1] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis of high-strength steel[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | Conflicting manufacturer claims: QIDI's US page says 600 mm/s, 3DJake's spec table says <=500 mm/s. The lower, more conservative figure is used as the sortable value[4][5] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[5] |
| Max volumetric flow claimed (mm³/s) | Not documented | Conflicting: 30 mm3/s (3DJake) vs 35 mm3/s (QIDI US page). Lower figure used[4][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | High-flow direct-drive extruder, 1.75 mm filament[4][5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Copper-alloy nozzle head for normal materials, hardened-steel nozzle head for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[4][5] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic RF plate[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click, via an intelligent mechanical sensor. One-Click Self-Check routine. Alarms for resin shortage, residue detection and levelling failure[1] | Automatic bed levelling; probe technology not named[5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[4][5] |
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Not documented | 800 W rated[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicer is CHITUBOX[1] | Klipper[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.0-inch capacitive touchscreen (control panel — not the masking LCD, see W1)[1] | 5-inch touchscreen, 800 x 480[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | Wi-Fi (150M 2.4G), Ethernet, USB flash drive[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera fitted; Elegoo does not publish its resolution for this model[1] | Not documented |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | AI camera detects empty build plates and print errors[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. No compatibility list published on this listing[1] | Not documented |
| Safety | ||
| Firmware safety limits (max temp cutoffs — exact values) | Overheating protection activates above 80 °C[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage (QIDI standard store terms)[9] |
| Resin & MSLA | ||
| Masking LCD | 7-inch 9K monochrome masking LCD, 8520 x 4320 px, XY pixel pitch 18 x 18 um (manufacturer specification)[1][3] | Not documented |
| Light source | 25-LED COB light source emitting a 405 nm UV beam (manufacturer specification)[1] | Not documented |
| Light uniformity & intensity | 92% light uniformity claimed by Elegoo. No intensity figure published, and no independent measurement[1] | Not documented |
| Vertical print speedmm/h | 150 mm/h maximum, which Elegoo attributes to the tilt-release mechanism (manufacturer claim). Elegoo also offers switchable slow and fast print modes but does not state the layer height the figure assumes[1] | Not documented |
| Layer exposure times | 1.5-3 s layer cure time (manufacturer figure; layer height not stated). Sortable value is the midpoint[1] | Not documented |
| LCD life & replaceability | Masking LCD protected by a scratch-resistant tempered 9H glass cover that also guards against resin leakage. Elegoo publishes no rated screen life in hours and does not state whether the user can replace the LCD[1] | Not documented |
| Resin vat & feeding | Resin tank supplied with the machine; resin-shortage and residue-detection alarms fitted. Capacity not published; no auto-refill[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Plus 3 official US page qidiusa.com · 2026-08 · vendor
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor