3D Printing InfoPrinter comparison
ELEGOO Mars 5 Ultra vs INTAMSYS FUNMAT PRO 610 HT
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Mars 5 Ultra comparisonsMore INTAMSYS FUNMAT PRO 610 HT comparisons
| Property | ELEGOO Mars 5 UltraRESIN | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | INTAMSYS |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Mars 5 Ultra. Elegoo's product handle is mars-5-ultra-9k-7inch-monochrome-lcd-resin-3d-printer[1][2][3] | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[4] |
| Street price (USD; dated snapshot per entry) | $269.00 in Elegoo's live US product feed, in stock, checked Aug 2026. The Mars 5 Series collection page rendered $259.00 against a $338.00 compare-at price on the same day, so the two Elegoo surfaces disagree by $10[3][2] | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not a trim of the Mars 5 — a different imaging stack and a different release mechanism: 7-inch 9K LCD and 18 um pixels vs 6.6-inch 4K and 35 um, 150 vs 70 mm/h, tilt-release vs straight lift, an AI camera, and Wi-Fi added. Seven bundle SKUs pair it with Mercury Plus V2.0/V3.0 or Mercury XS at $363-$432[5][1][2][3] | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 153.36 x 77.76 x 165 mm[1] | 610 x 508 x 508 mm (24 x 20 x 20 in)[4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 260 x 268 x 451.5 mm[1] | 1710 x 1425 x 2350 mm including the warning lights[4] |
| Net weight (kg) | Approximately 8.8 kg[1] | 1450 kg[4] |
| Frame construction & material | Not documented | Servo control system on high-precision ball screws; liquid cooling plus fans[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a removable UV-blocking cover[1] | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA with tilt-release: the resin tank tilts after each layer to peel the part rather than pulling straight up. Single Z axis[1] | Servo-driven ball-screw motion system; two nozzles[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Two nozzles, 1.75 mm filament[4] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 500 °C maximum nozzle temperature (manufacturer specification)[4] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Up to 300 °C heated build plate[4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible build plates with a vacuum adsorption system[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling, one click, via an intelligent mechanical sensor. One-Click Self-Check routine. Alarms for resin shortage, residue detection and levelling failure[1] | Auto levelling; probe technology not named[4] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 V, 50/60 Hz, 24 V 3 A[1] | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[4] |
| Total rated power draw | Not documented | 15 kW maximum[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Elegoo. Supported slicer is CHITUBOX[1] | Proprietary; slicing is INTAMSUITE (Windows only)[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.0-inch capacitive touchscreen (control panel — not the masking LCD, see W1)[1] | 10-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1] | Wi-Fi, Ethernet, USB[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera fitted; Elegoo does not publish its resolution for this model[1] | Not documented |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | AI camera detects empty build plates and print errors[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin. No compatibility list published on this listing[1] | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[4] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, FCC, SGS; safety design to EN60204[4] |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Not documented | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[4] |
| Firmware safety limits (max temp cutoffs — exact values) | Overheating protection activates above 80 °C[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[4] |
| Resin & MSLA | ||
| Masking LCD | 7-inch 9K monochrome masking LCD, 8520 x 4320 px, XY pixel pitch 18 x 18 um (manufacturer specification)[1][3] | Not documented |
| Light source | 25-LED COB light source emitting a 405 nm UV beam (manufacturer specification)[1] | Not documented |
| Light uniformity & intensity | 92% light uniformity claimed by Elegoo. No intensity figure published, and no independent measurement[1] | Not documented |
| Vertical print speedmm/h | 150 mm/h maximum, which Elegoo attributes to the tilt-release mechanism (manufacturer claim). Elegoo also offers switchable slow and fast print modes but does not state the layer height the figure assumes[1] | Not documented |
| Layer exposure times | 1.5-3 s layer cure time (manufacturer figure; layer height not stated). Sortable value is the midpoint[1] | Not documented |
| LCD life & replaceability | Masking LCD protected by a scratch-resistant tempered 9H glass cover that also guards against resin leakage. Elegoo publishes no rated screen life in hours and does not state whether the user can replace the LCD[1] | Not documented |
| Resin vat & feeding | Resin tank supplied with the machine; resin-shortage and residue-detection alarms fitted. Capacity not published; no auto-refill[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Elegoo Mars 5 Ultra product page (technical data and description) 3djake.com · 2026-08 · vendor
- ELEGOO Mars 5 Series collection (live US prices) us.elegoo.com · 2026-08 · vendor
- ELEGOO Mars 5 Series live product feed us.elegoo.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Elegoo Mars 5 product page (technical data and description) 3djake.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor