3D Printing InfoPrinter comparison
ELEGOO Centauri Carbon vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ELEGOO Centauri Carbon comparisonsMore Snapmaker Artisan comparisons
| Property | ELEGOO Centauri CarbonCOREXY | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | ELEGOO | Snapmaker |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ELEGOO Centauri Carbon[1] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[2] |
| Release date (announcement and actual shipping) | Listed on the ELEGOO US store from 17 February 2025 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $419.99 on us.elegoo.com, Aug 2026, with the compare-at price also $419.99 (no discount running)[3] | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Superseded by the Centauri Carbon 2, which raises the nozzle ceiling to 350 C and swaps the nano mineral crystal filter for a HEPA plus coconut-shell carbon stack, adds clog detection, a smart exhaust grille and part-cooling-fan drop detection. The non-carbon Centauri and Centauri 2 are open-frame-oriented machines with a different filament list. Machine size 398 x 404 x 490 mm is shared with the Centauri 2, so body dimensions alone will not identify the model[4][5][1] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[2] |
| Market position: superseded? successor announced? | Superseded within ELEGOO's own line-up: the US store's Centauri section in Aug 2026 lists the Centauri Carbon 2 Combo, Centauri 2 Combo, Centauri Carbon 2 and an emoji collaboration edition[6] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm; printing platform 260 x 260 mm[1] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 404 x 490 mm[1] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[2] |
| Net weight (kg) | 17.5 kg net, 21 kg gross[1] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[2] |
| Frame construction & material | Integrated die-cast aluminium construction, which ELEGOO credits for reduced vibration at speed[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a tempered glass door and top cover; a nano mineral crystal air filter, an auxiliary part-cooling fan and a chamber temperature regulator fan are fitted[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | IDEX — two independently driven print heads[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three lead screws with three linear guide rods[1] | Z-axis lead 8 mm; X and Y leads 40 mm[2] |
| Belts (type, width, e.g. Gates?) | Semi-automatic belt tensioner[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | "Silent Drive (All Axes)" is all that is published; no driver part number is given[1] | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s or less, with 250 mm/s given by ELEGOO as the recommended speed[1] | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[2] |
| Recommended/typical print speed | 250 mm/s recommended printing speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration; default acceleration 10000 mm/s2[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 32 mm3/s claimed flow rate (manufacturer figure; no test conditions published)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual-gear direct extruder with one fan[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass-hardened steel nozzle, 0.4 mm, with a titanium-alloy heat break; a heatbed nozzle wiper cleans it before each print[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 320 C claimed max nozzle temperature (the Centauri Carbon 2 raises this to 350 C)[1][4] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heated bed temperature at 25 C ambient[1] | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[2] |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided spring steel sheet - textured PEI on one face, a PLA-specific surface on the other[1] | Dual-sided textured PEI sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 121-point auto-levelling with full-auto calibration[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, auto filament unloading, power-loss recovery and fan self-check; no clog detection on this model (the Centauri Carbon 2 adds it)[1][4] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part cooling plus an auxiliary part-cooling fan and a chamber temperature regulator fan, with real-time fan self-checks[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | ELEGOO describes it only as a "Powerful Self-Developed Motherboard"; no board model or MCU is published[1] | Not documented |
| Total rated power draw | 1100 W at 220 V, 350 W at 110 V rated; 24 V output; 100-240 VAC input[1] | Integrated controller rated 300 W + 450 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | ELEGOO OS with OTA updates; 8 GB of on-board storage. ElegooSlicer recommended, with Orca and Cura supported[1] | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour capacitive touch screen[1] | 7-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; LED chamber lighting fitted; OTA firmware updates[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and dual-band Wi-Fi for LAN transfers[1] | Wi-Fi, USB cable, USB flash drive[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Chamber camera fitted, with real-time monitoring and time-lapse; dual built-in LED strips[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Carbon/glass fibre reinforced filaments, PLA, PETG, ABS, ASA, TPU, PET, PC, PA[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Operating sound published as 55 dB or less - a manufacturer figure with no distance or method stated, so not comparable with an independently measured dB reading[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[7] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- ELEGOO Centauri Carbon Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri 2 product page (Centauri 2 Combo vs Centauri 2 side-by-side specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor