3D Printing InfoPrinter comparison
Creality K2 Pro vs LulzBot TAZ Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Pro comparisonsMore LulzBot TAZ Pro comparisons
| Property | Creality K2 ProCOREXY | LulzBot TAZ ProBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Creality | LulzBot |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Pro[1] | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[2] |
| Street price (USD; dated snapshot per entry) | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price[3] | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Between the K2 (260 mm cube, no chamber heating, 100 C bed, 8 GB) and the K2 Plus (350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi). The K2 Pro shares the K2's 300 C nozzle and 70 W hotend but gets the chamber heater, RFID reader, Ethernet and 32 GB storage[1] | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm[1] | 285 x 285 x 285 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 445 x 477 x 573 mm[1] | Not documented |
| Net weight (kg) | 23.7 kg[1] | Not documented |
| Frame construction & material | Not documented | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C; one air filter[1] | Open frame, no enclosure[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | Cartesian bedslinger[2] |
| Belts (type, width, e.g. Gates?) | Manual belt tensioning[1] | GT2 belt drive[2] |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X and Y axes and the extruder[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | Not documented |
| Max travel speed | Not documented | 300 mm/s maximum travel speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 290 °C maximum hot end temperature[2] |
| Heater cartridge power (W) | 70 W rated hotend power[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.5 mm hardened steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature[1] | 110 °C maximum bed temperature[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided borosilicate glass with PEI film[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling, plus automatic flow-rate calibration using a nozzle AI camera[1] | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 4-point mesh[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with both runout and stripping detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One auxiliary cooling fan and one air filter[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[5][6][1] | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4-inch touchscreen[1] | 5-inch full-colour resistive touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with alarm sounds and a built-in RFID reader for automatic filament identification (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | USB serial; a 16 GB flash drive is included for standalone printing[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 720p 30 fps, plus a separate nozzle AI camera used for flow calibration[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[5][6] | Not documented |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[7] | 1 year standard, with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Creality US store - K2 Pro Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor