3D Printing InfoPrinter comparison
Creality K2 Plus vs Voron 2.4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality K2 Plus comparisonsMore Voron 2.4 comparisons
| Property | Creality K2 PlusCOREXY | Voron 2.4COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality K2 Plus[1] | Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[2][3] |
| Street price (USD; dated snapshot per entry) | $999.00 on store.creality.com, Aug 2026[4] | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[2][5][6] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Largest and only fully specified K2. It is the only one with a 350 C nozzle, a 120 C bed, 30000 mm/s2 acceleration, step-servo motors on Z as well as X/Y, automatically adjusted belt tension, two auxiliary cooling fans, two air filters, a 1080p chamber camera, dual-band Wi-Fi and a 4.3-inch screen. Its "smart auto levelling" is listed as arriving via firmware update rather than shipping enabled, unlike the K2 and K2 Pro. A separate K2 SE model also exists[1] | Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[2][3][6][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[2][3][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 495 x 515 x 640 mm[1] | Not documented |
| Net weight (kg) | 35 kg[1] | Not documented |
| Frame construction & material | Not documented | Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[3][6] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with chamber temperature control up to 60 C and two air filters[1] | Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 C max chamber temperature (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[1] | CoreXY on linear rails, with a belted flying gantry on four Z motors[3][2] |
| Belts (type, width, e.g. Gates?) | Automatically adjusted belt tension - the K2 and K2 Pro are tensioned by hand[1] | Not documented |
| Stepper motors (frame size, step angle, brand if known) | Step-servo motors on the X, Y and Z axes and the extruder[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 30000 mm/s2 max acceleration (manufacturer claim) - 50% above the rest of the K2 family[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a 0.4 mm hardened "unicorn" quick-swap nozzle[8] | Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[2][3][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[2][3][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | Not documented |
| Heater cartridge power (W) | 100 W rated hotend power[1] | 60 W (E3D Revo High Flow heater)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Coated steel flex plate, heated, removable[8] | Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[3][2][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Smart auto levelling listed as "Available via Firmware Update" rather than shipping enabled; automatic flow-rate calibration via the nozzle AI camera[1] | Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[2][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[8] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two auxiliary cooling fans and two air filters[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[3][2][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[9][10][1] | Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[2][3][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[1] | 4.3-inch touchscreen included in the LDO kit[6] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with a built-in RFID reader; Creality notes the K2 Plus has no alarm sounds, which the K2 and K2 Pro do have[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi (2.4 and 5 GHz), RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | One chamber camera at 1080p 30 fps plus the nozzle AI camera[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED strips included[2][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[6] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[1] | Not documented |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[9][10] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] | Not documented |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 15 minutes 56 seconds - independently measured by Tom's Hardware, which noted visible layer lines and slightly droopy overhangs at that speed[8] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
- Creality US store - K2 Plus 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Tom's Hardware - Creality K2 Plus Review (spec box and measured Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor