3D Printing InfoPrinter comparison
Creality Hi vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
| Property | Creality HiBEDSLINGER | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Hi, sold as the "Creality Hi Combo" with one CFS unit[1] | Sovol SV08 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | The Creality US store Hi Combo page lists three variant prices - $299.00, $399.00 and $539.00 - on the same page, Aug 2026; the lowest is recorded here and the combo includes one CFS unit[4] | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo bundled with one CFS multi-material unit; up to four CFS units can be stacked for 16 colours, and the extra three are bought separately. Three price variants exist on the store page, so a single "Creality Hi" price is ambiguous[1] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][5][6][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 300 mm[1] | 350 x 350 x 345 mm advertised[2][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 409 x 392 x 477 mm (Tom's Hardware measurement of the printer's footprint)[7] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][6] |
| Net weight (kg) | 11.58 kg (Tom's Hardware measurement)[7] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[6] |
| Frame construction & material | Full metal body with frame parts die-cast from aluminium alloy[1] | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | 700 mm/s maximum (manufacturer claim)[2][6] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][6] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=30 mm3/s (manufacturer claim)[2][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Modular direct-drive extruder, which Creality markets as clog-free and designed for repairability[1] | Planetary-gear direct-drive extruder[2][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 0.4 mm high-flow hardened steel "unicorn" quick-swap nozzle[7] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (Tom's Hardware)[7] | <=300 °C claimed[2][6] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=100 °C claimed[2][6] |
| Bed surface (material, texture, coating), single/double-sided | Two-sided epoxy-resin flexible build plate, heated[7] | Powder-coated PEI steel plate[2][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling, plus automatic filament load and unload[1] | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][6][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[7] | Filament sensor fitted, with filament-runout resume; type and location not published[2][6] |
| Multi-material/multi-color capability or official upgrade path | Pairs with up to four CFS units for up to 16 colours; the combo ships with one CFS. Multi-material also enables snap-away support material[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][6] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper-derived firmware - Creality publishes the source as CrealityOfficial/Hi_Klipper on GitHub, GPL-3.0, last pushed March 2026[8][9] | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch touchscreen, pre-assembled and foldable to shrink the footprint[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with input shaping, alarm sounds and auto filament identification via the built-in RFID reader (needs Creality RFID filament)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, LAN, cloud and app[7] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | 95% pre-assembled[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG (Tom's Hardware's materials line for the Hi Combo)[7] | PLA, PETG, TPU, PETG-CF, ABS and others[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes CrealityOfficial/Hi_Klipper (GPL-3.0) for this model; upstream Klipper ships the verify_heater thermal-runaway check, but the stock configuration was not checked here[8][9] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | Not documented |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 32 minutes 33 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[7] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 3.5 out of 5 in the page's structured data - the lowest score of any Creality machine recorded here[7] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Hi Combo product page creality.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Creality US store - Creality Hi Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor
- Tom's Hardware - Creality Hi Combo review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- GitHub API - CrealityOfficial/Hi_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor