3D Printing InfoPrinter comparison
Creality Hi vs ELEGOO OrangeStorm Giga
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Hi comparisonsMore ELEGOO OrangeStorm Giga comparisons
| Property | Creality HiBEDSLINGER | ELEGOO OrangeStorm GigaINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Creality | ELEGOO |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Hi, sold as the "Creality Hi Combo" with one CFS unit[1] | ELEGOO OrangeStorm Giga[2] |
| Release date (announcement and actual shipping) | Not documented | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[3] |
| Street price (USD; dated snapshot per entry) | The Creality US store Hi Combo page lists three variant prices - $299.00, $399.00 and $539.00 - on the same page, Aug 2026; the lowest is recorded here and the combo includes one CFS unit[4] | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sold as a combo bundled with one CFS multi-material unit; up to four CFS units can be stacked for 16 colours, and the extra three are bought separately. Three price variants exist on the store page, so a single "Creality Hi" price is ambiguous[1] | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 300 mm[1] | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 409 x 392 x 477 mm (Tom's Hardware measurement of the printer's footprint)[6] | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[2] |
| Net weight (kg) | 11.58 kg (Tom's Hardware measurement)[6] | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[2] |
| Frame construction & material | Full metal body with frame parts die-cast from aluminium alloy[1] | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear guide on the X axis[2] |
| Y-axis guide type | Not documented | Linear guide on the Y axis[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Four lead screws with four linear guide rods[7] |
| Belts (type, width, e.g. Gates?) | Not documented | X/Y belts with knob-adjustable tensioners[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)"; no driver part number published[7] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max printing speed (manufacturer claim)[1] | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[2][7] |
| Recommended/typical print speed | Not documented | 150 mm/s recommended printing speed (manufacturer figure)[7] |
| Max acceleration (claimed, mm/s²) | 12000 mm/s2 max acceleration (manufacturer claim)[1] | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[7] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Modular direct-drive extruder, which Creality markets as clog-free and designed for repairability[1] | Dual-gear direct extruder with 2 fans[7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 0.4 mm high-flow hardened steel "unicorn" quick-swap nozzle[6] | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature (Tom's Hardware)[6] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[2] |
| Bed surface (material, texture, coating), single/double-sided | Two-sided epoxy-resin flexible build plate, heated[6] | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling, plus automatic filament load and unload[1] | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[7][8] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[6] | Filament detection and power-loss resume printing[2] |
| Multi-material/multi-color capability or official upgrade path | Pairs with up to four CFS units for up to 16 colours; the combo ships with one CFS. Multi-material also enables snap-away support material[1] | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[7] |
| Total rated power draw | Not documented | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[2][7] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper-derived firmware - Creality publishes the source as CrealityOfficial/Hi_Klipper on GitHub, GPL-3.0, last pushed March 2026[9][10] | Klipper[7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.2-inch touchscreen, pre-assembled and foldable to shrink the footprint[1] | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[7] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touch UI with input shaping, alarm sounds and auto filament identification via the built-in RFID reader (needs Creality RFID filament)[1] | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[7] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, LAN, cloud and app[6] | Wi-Fi, USB and LAN file transfer[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | 95% pre-assembled[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA and PETG (Tom's Hardware's materials line for the Hi Combo)[6] | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[2][7] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not verified directly. Creality publishes CrealityOfficial/Hi_Klipper (GPL-3.0) for this model; upstream Klipper ships the verify_heater thermal-runaway check, but the stock configuration was not checked here[9][10] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[12] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 32 minutes 33 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[6] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 3.5 out of 5 in the page's structured data - the lowest score of any Creality machine recorded here[6] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Hi Combo product page creality.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Creality US store - Creality Hi Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Tom's Hardware - Creality Hi Combo review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/Hi_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor