3D Printing InfoPrinter comparison
Creality Ender-3 V3 vs ELEGOO OrangeStorm Giga
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 comparisonsMore ELEGOO OrangeStorm Giga comparisons
| Property | Creality Ender-3 V3BEDSLINGER | ELEGOO OrangeStorm GigaINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Creality | ELEGOO |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3, marketed as a CoreXZ machine[1] | ELEGOO OrangeStorm Giga[2] |
| Release date (announcement and actual shipping) | Not documented | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[3] |
| Street price (USD; dated snapshot per entry) | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[4] | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[1][5][6] | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[2][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1] | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 358 x 374 x 498 mm[1] | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[2] |
| Net weight (kg) | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[1][8] | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[2] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[1] | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear guide on the X axis[2] |
| Y-axis guide type | Not documented | Linear guide on the Y axis[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Four lead screws with four linear guide rods[9] |
| Belts (type, width, e.g. Gates?) | Not documented | X/Y belts with knob-adjustable tensioners[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)"; no driver part number published[9] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[1][5] | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[2][9] |
| Recommended/typical print speed | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[5] | 150 mm/s recommended printing speed (manufacturer figure)[9] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (manufacturer claim)[1] | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[9] |
| Extruder | ||
| Type (direct drive / bowden) & design name | New high-speed direct-drive extruder[1] | Dual-gear direct extruder with 2 fans[9] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[1][8] | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[9] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[1] | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI flexible build plate, removable spring steel[1] | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[1][8] | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[9][10] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted[1] | Filament detection and power-loss resume printing[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit mainboard (Creality does not name the board or MCU)[1] | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[9] |
| Total rated power draw | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[1] | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[2][9] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[1][11] | Klipper[9] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch HD colour touchscreen[1] | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[9] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[1] | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[9] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[1] | Wi-Fi, USB and LAN file transfer[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | AI camera optional, not fitted as standard[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[1] | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[2][9] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[12] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[13] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[8] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware rating 4.5 out of 5 in the page's structured data[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor