3D Printing InfoPrinter comparison
Creality Ender-3 V3 Plus vs FlashForge Adventurer 5M Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Creality Ender-3 V3 Plus comparisonsMore FlashForge Adventurer 5M Pro comparisons
| Property | Creality Ender-3 V3 PlusBEDSLINGER | FlashForge Adventurer 5M ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Creality | FlashForge |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Creality Ender-3 V3 Plus, marketed as a "Plus-sized CoreXZ 3D Printer"[1] | Flashforge Adventurer 5M Pro; FlashForge's own spec table gives the machine name as "Adventurer 5M PRO" and the store abbreviates it AD5M Pro[2][3] |
| Street price (USD; dated snapshot per entry) | $339.00 on store.creality.com, Aug 2026[4] | $449.00 sale against a $599.00 regular price on flashforge.com, in stock, with a further $80 auto-applied in cart, checked Aug 2026. FlashForge's own product feed lists the first variant at $399.00, so the price you see depends on the variant selected. A refurbished AD5M Pro is listed at $339.00[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the Ender-3 V3 on the same CoreXZ platform: 300 x 300 x 330 mm against 220 x 220 x 250 mm, with dual Y-axis motors and support rods added to carry the bigger bed. Not to be confused with the bed-slinger SE and KE, which are not CoreXZ[1][5] | Enclosed sibling of the open-frame Adventurer 5M (same 220 mm cube, same 280 °C nozzle, same 600 mm/s, but 100 °C bed vs 110 °C and no filtration). Also distinct from the AD5X, which shares the chassis but has a 300 °C nozzle, a 4-colour IFS unit and no air filtration. Refurbished units of all three are sold separately[2][6][7][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 330 mm[1] | 220 x 220 x 220 mm advertised[2][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 410 x 445 x 577 mm[1] | 380 x 400 x 453 mm excluding the spool holder[2][8] |
| Frame construction & material | Not documented | All-metal CoreXY structure (FlashForge writes it "CoXY")[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed. Dual-layer HEPA plus activated-carbon filtration on both internal and external circulation; FlashForge claims 99% capture of particles and VOCs[2][8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXZ - Creality states the X and Z axes are rigged together so two high-torque motors work in unison; the bed moves in Y on dual motors and support rods[1] | CoreXY[2][9] |
| Y-axis guide type | Y axis driven by two 500 mN.m motors running on two linear rods[1] | Not documented |
| Belts (type, width, e.g. Gates?) | XZ timing belts are tensioned automatically, which Creality offers as the fix for belt slip and jams[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s max printing speed (Creality Lab claim)[1] | 600 mm/s maximum travel speed (FlashForge's own table labels the 600 mm/s figure "Max Travel Speed", not print speed)[2][8] |
| Recommended/typical print speed | 300 mm/s typical printing speed (Creality Lab figure, stated in the same footnote as the 600 mm/s claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max acceleration (Creality Lab claim)[1] | 20,000 mm/s2 maximum (manufacturer claim)[2][8] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder kit that Creality markets as clog-free[1] | Direct drive, one extruder[2][8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-swap tri-metal nozzle[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 280 °C claimed[2][8] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm standard; 0.25, 0.6 and 0.8 mm available[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Conflicting manufacturer figures: FlashForge's own spec table says 100 °C platform temperature, 3DJake's table says 110 °C. Lower vendor figure used as the sortable value[2][8] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible removable PEI-coated spring-steel plate[2][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic levelling; FlashForge does not name the probe technology on the product page[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out reminder[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Two part-cooling fans[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Internal plus external circulation with a HEPA and activated-carbon filter[2][8] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-120 V / 200-240 V, 50/60 Hz[2][8] |
| Total rated power draw | Not documented | 350 W rated[2][8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch screen[2][8] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, Ethernet, USB[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera monitoring listed; resolution and framerate not published[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery, plus automatic shutdown[2] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA and PETG on the 0.4 mm nozzle; ABS/ASA; TPU, PLA-CF and PETG-CF on 0.6/0.8 mm nozzles[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Manufacturer claim only, no independent measurement: 50 dB in low-noise mode, 55 dB in standard mode. Distance and method not stated[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[10] | FlashForge's Adventurer 5M page states a 12-month limited warranty for that model; the 5M Pro page does not restate it[6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Flashforge Adventurer 5M Pro product page flashforge.com · 2026-08 · vendor
- Flashforge store product feed (live prices and stock) flashforge.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 Plus 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Flashforge Adventurer 5M product page flashforge.com · 2026-08 · vendor
- Flashforge AD5X multicolour 3D printer product page flashforge.com · 2026-08 · vendor
- FlashForge Adventurer 5M Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor