3D Printing InfoPrinter comparison
Bambu Lab X1E vs UltiMaker S8
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab X1E comparisonsMore UltiMaker S8 comparisons
| Property | Bambu Lab X1ECOREXY | UltiMaker S8INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | UltiMaker |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab X1E; spec PDF header "Bambu Lab X1E Technical Specification"[1] | UltiMaker S8 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Not documented | Launched March 2025; the technical-specification and pricing announcement is dated 14 March 2025[3] |
| Street price (USD; dated snapshot per entry) | Not documented | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enterprise variant of the X1-Carbon, not a trim level. Differences from the X1C, from the two manufacturer spec sheets side by side: active chamber heating to 60 C (X1C has none), 320 C vs 300 C hot end, Smooth PEI plate included vs Cool/Engineering plates, G3+H12+carbon filter stack vs carbon filter only, Ethernet with a network kill switch, removable network module and 802.1X vs Wi-Fi only, 16 kg vs 14.13 kg, and 1400 W at 220 V / 750 W at 110 V vs 1000 W / 350 W[1][4] | Sold as printer-only or as a Pro Bundle. The bundle is not a trim level but a different machine footprint and weight: 495 x 500 x 1210.5 mm and 47.7 kg with the 6-spool Material Station, versus 495 x 585 x 800.5 mm and 30 kg for the printer alone. Print cores AA+ 0.40 x2 are included; BB, CC+ and DD 0.40 are separate purchases[2][3] |
| Market position: superseded? successor announced? | Not present in the Bambu Lab US store 3D-printer collection in Aug 2026, which lists A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D and H2C. Bambu sells business machines through a separate Business & Institution channel, so absence from the consumer collection is not proof of discontinuation; no live first-party price could be recorded[5] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm (manufacturer figure)[1] | 330 x 240 x 300 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 389 x 389 x 457 mm - identical to the X1-Carbon[1] | 495 x 585 x 800.5 mm printer only; 495 x 500 x 1210.5 mm as the Pro Bundle[2][3] |
| Net weight (kg) | 16 kg net (against 14.13 kg for the X1-Carbon)[1][4] | 30 kg printer only; 47.7 kg as the Pro Bundle[2][3] |
| Frame construction & material | Steel chassis with an aluminium and glass shell[1] | Fully assembled, made in Europe[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor, and the only X1 with active chamber heating; the chamber is controlled to a maximum of 60 C[1] | Enclosed, with an Air Manager UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Actively heated chamber, maximum controlled temperature 60 C (manufacturer figure; not a passive measurement)[1] | Build-volume temperature under 50 °C with open-loop control (manufacturer figure)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY, two stepper motors with one belt each (X1 series motion system)[6] | Dual-extrusion print head with auto nozzle-lifting, flood detection and inductive probing. UltiMaker's Cheetah motion planner uses third-order continuous motion with corner blending[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Carbon X rail as on the X1-Carbon (X1 series toolhead and gantry)[7] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews belt-driven from a single stepper motor, whole bed moving in Z (X1 series)[6] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | Up to 500 mm/s in XY (manufacturer claim)[2][3] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Up to 50,000 mm/s2 (manufacturer claim)[2][3] |
| Jerk / square-corner-velocity setting (exact value) | Not documented | Jerk up to 100,000,000 mm/s3 (manufacturer claim)[2][3] |
| Max volumetric flow claimed (mm³/s) | 32 mm3/s claimed on a 150x150 mm single-wall model in Bambu ABS at 280 C[1] | Up to 35 mm3/s extrusion flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel extruder gears[1] | Dual gripper feeder with tension adjustment, release function and filament feed-rate control[2][3] |
| Filament diameter | Not documented | 2.85 mm[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend with a hardened-steel nozzle; 0.4 mm included, 0.2/0.6/0.8 mm optional; built-in filament cutter[1] | Swappable print cores; AA+ 0.40 x2 included, BB 0.40 / CC+ 0.40 / DD 0.40 sold separately[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 320 C claimed max hot-end temperature - 20 C above the X1-Carbon[1][4] | Up to 340 °C (manufacturer claim)[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C at 220 V, 120 C at 110 V max build-plate temperature[1] | Up to 120 °C on a flexible PEI plate (manufacturer claim)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate, Smooth PEI plate included; High Temperature, Textured PEI and Cool plates optional[1] | Flexible PEI plate[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing on the three ceramic heatbed force sensors, plus the Bambu micro-lidar for first-layer inspection[1][8] | Inductive probing, integrated into the print head[2][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor and door sensor; odometry with AMS[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Dual spool holder with NFC recognition on the printer; the Pro Bundle substitutes a 6-spool Material Station with NFC and a dual-geared abrasion-resistant feeder[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hot-end fan, control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan, all closed-loop controlled[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | G3 pre-filter, H12 HEPA filter and granulated coconut-shell activated-carbon filter; VOC filtration rated Optimal and particulate filtration present[1] | Air Manager, which UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller dual-core Cortex-M4; application processor quad ARM A7 at 1.2 GHz with a 2 TOPS NPU; 4 GB eMMC[1] | Not documented |
| Total rated power draw | 100-240 VAC 50/60 Hz; 1400 W at 220 V, 750 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] | Not published; print preparation is UltiMaker Cura 5.10 or newer, fleet management via UltiMaker Digital Factory[2][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 1280x720 touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus app and PC application[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (802.11 b/g/n) plus 100 Mbps full-duplex RJ45 Ethernet, a network kill switch covering both Wi-Fi and Ethernet, a removable network module and 802.1X network access control - the feature set that distinguishes the X1E from every other Bambu machine. 4 GB eMMC and a microSD card reader[1] | Wi-Fi 2.4 and 5 GHz (802.11a/b/g/n/ac), Gigabit Ethernet, USB 2.0[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in 1920x1080 chamber monitoring camera; micro-lidar also fitted[1] | Full HD HDR camera[2][3] |
| Materials Support | ||
| Officially supported filament list | Optimal: PLA, PETG, TPU, PVA, BVOH. Superior: ABS, ASA, PC, PA, PET and carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA. Ideal: PPA-CF/GF, PPS, PPS-CF/GF[1] | UltiMaker cites 301+ compatible materials including its own PLA, PETG, ABS, CPE, CPE+, PC, TPU and PET-CF, plus third-party grades[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Firmware over-temperature protection is documented for the X1 series: HMS_0300-0200-0001-0003 fires when the heater runs at full power without reaching target in time. Thresholds are not published and the firmware is closed-source[10] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[11] | 12 months, extendable to 5 years with an UltiMakerCare plan[2][3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy +/-0.15 mm +/-0.15% of feature nominal length (manufacturer specification, not an independent measurement)[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab X1E Technical Specification (PDF) cdn1.bambulab.com · 2026-08 · doc
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Bambu Lab X1-Carbon - Technical Specifications (PDF) public-cdn.bambulab.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - X1 introduction wiki.bambulab.com · 2026-08 · doc
- PRNewswire - Bambu Lab Launches X1 Series, 23 May 2022 (Kickstarter dates and MSRP table) prnewswire.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Wiki - HMS_0300-0200-0001-0003: nozzle heater over-temperature (X1 series) wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor