3D Printing InfoPrinter comparison
Bambu Lab P1S vs Original Prusa XL+ Single-Tool
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1S comparisonsMore Original Prusa XL+ Single-Tool comparisons
| Property | Bambu Lab P1SCOREXY | Original Prusa XL+ Single-ToolCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Prusa Research |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1S. Store title: "Bambu Lab P1S 3D Printer"[1] | Original Prusa XL+, Single-Tool variant ("Prusa XL+ Single-Tool" in the e-shop variant data)[2][3] |
| Release date (announcement and actual shipping) | Not documented | The XL+ refresh was announced on 13 August 2026, on sale immediately in all toolhead configurations, with assembled printers shipping later in August 2026 and upgrade kits for existing XL owners from around the end of August. The original Original Prusa XL predates it[4] |
| Street price (USD; dated snapshot per entry) | From $369.00 (base P1S) on the Bambu Lab US store, Aug 2026, against a stated typical price of $399.00; with the P1S AMS 2 Pro Combo variant selected the same page shows $539.00 against a typical $579.00[5][1] | $2,128.70 on prusa3d.com, Aug 2026 (lowest listed price for the Single-Tool variant; the Enclosure bundle starts at $2,610.19)[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the P1P and mechanically the same motion platform. Three SKUs on one product page: P1S, P1S AMS Combo and P1S AMS 2 Pro Combo (the AMS 2 Pro adds active filament drying). Sibling figures that get mixed up: net weight 12.95 kg (P1S) vs 9.65 kg (P1P); depth 389 mm vs 386 mm; ABS/ASA Ideal (P1S) vs Capable (P1P). Also distinct from the 2026 P2S, which is a different machine (600 mm/s, 110 C bed, 5-inch touchscreen, 14.9 kg)[1][6] | The XL+ is sold in Single-Tool, Dual-Head and Five-Head variants at $2,128.70, $2,768.52 and $3,610.18 respectively (Aug 2026), plus Enclosure bundles and a Critical Infrastructure edition. The frame is the same in all of them - Prusa states the frame is ready for toolheads to be added at any time - so build volume, bed and electronics figures are shared and only the toolhead count and price differ. The XL+ is itself a revision of the Original Prusa XL: the older XL aligned toolheads with a mechanical pin, the XL+ uses a dedicated electronic sensor, adds a nozzle wiper and is claimed to print 10-15% faster[2][3] |
| Market position: superseded? successor announced? | Still sold in Aug 2026, but Bambu now markets the P2S as "The Classic Evolves" above it in the same enclosed-CoreXY slot[5][7] | Current model; an Original Prusa XL to Prusa XL+ upgrade kit is sold for existing owners[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote sets the default printable height in Bambu Studio to 250 mm to prevent heatbed collisions, and notes the collapsible filament-cutter stopper occupies part of the print area when popped out[1] | 360 x 360 x 360 mm, which Prusa states as 46.7 litres[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 389 x 389 x 458 mm; package 485 x 480 x 530 mm[1] | About 700 x 900 x 720 mm (Prusa's own figure is approximate)[2] |
| Net weight (kg) | 12.95 kg net, 17.60 kg gross; the AMS Combo ships at 21.60 kg gross and the AMS 2 Pro Combo at 21 kg gross[1] | About 30 kg[2] |
| Frame construction & material | Steel chassis (shared with the P1P) inside plastic and glass panels[1] | Aluminium extrusions and steel sheets (Prusa's comparison table for the XL)[8] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed - plastic and glass panels with a glass front door and lid, plus an activated-carbon air filter. No active chamber heater; the chamber temperature regulator fan is closed-loop controlled[1] | Open frame. The Enclosure for Prusa XL+ is an optional add-on; Prusa says the printer is ready for chamber temperatures up to 60 C, that the new better-sealed enclosure reaches around 50 C on the printer's own waste heat, and that 60 C needs an upcoming chamber heater for which no shipping date has been given[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with an independent belt to the printhead; the P1P and P1S share the same motion system[9] | CoreXY with 1.5 mm GT belts, Input Shaper and Phase Stepping[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews belt-driven from a single stepper motor, whole bed moving in Z; manual tramming by three knobs under the bed, no motorised Z-tilt[9] | Not documented |
| Belts (type, width, e.g. Gates?) | Rear adjustable belt tensioners with a Belt Tension Monitor[9] | 1.5 mm GT belts[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input Shaper and Phase Stepping[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; the service part is the "Stainless Steel Extruder Unit (P1 series)"[9] | Nextruder direct drive; each toolhead carries its own extruder, hotend, nozzle and filament[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend with the nozzle integrated into the heatblock, replaced as a unit; 0.4 mm stainless-steel nozzle included, 0.2/0.6/0.8 mm optional[1][9] | Quick-swap nozzles - 0.25 mm for detail, 0.6/0.8 mm for speed, hardened steel for abrasives, high-flow CHT for throughput; toolheads ship with high-flow nozzles[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | 290 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | Segmented heatbed of 16 individually controlled tiles across the 360 x 360 mm surface, so only the tiles under the part are powered; removable double-sided satin print sheet supplied[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing using three ceramic force (piezo) sensors mounted under the heatbed - Z homing is done by detecting the force of the nozzle contacting the bed[10][9] | Load-cell sensor - the nozzle is the probe, which Prusa says automatically accounts for nozzle changes, surface textures and thermal expansion and removes manual Z-offsets. Toolhead-to-toolhead alignment on the XL+ uses a separate permanently mounted eddy-current Tool Offset Sensor, replacing the removable mechanical pin used on the original XL[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Filament sensors fitted; Prusa's comparison table lists two filament sensors for the XL[8] |
| Multi-material/multi-color capability or official upgrade path | AMS-compatible; sold as P1S AMS Combo and P1S AMS 2 Pro Combo, up to 16 colours with four AMS units[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan plus auxiliary part-cooling fan, control-board fan and chamber temperature regulator fan, all closed-loop controlled (all four are merely Optional on the P1P)[1] | 360-degree part cooling on each toolhead, new on the XL+ and matching the MK4S and CORE One arrangement; Prusa states it delivers more airflow and distributes it more evenly around the nozzle. Additional fans and heatsinks cool the electronics. Fan sizes are not published[2][4] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber temperature regulator fan with an activated-carbon air filter[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Custom 32-bit xBuddy electronics with STM32 (Prusa's comparison table for the XL)[8] |
| Total rated power draw | 100-240 VAC 50/60 Hz; 1000 W at 220 V, 350 W at 110 V[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[11] | Open-source firmware - Prusa states "Firmware: Open-source; ships with the full current Prusa feature set", and the XL is covered by the prusa3d/Prusa-Firmware-Buddy source tree[2][12] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen; control by button, app or PC application (P1 series)[9] | 3.5-inch 65k-colour screen with touch control (Prusa's comparison table for the XL)[8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven monochrome on-device UI; job setup happens in Bambu Studio or Bambu Handy[9] | On-device touch UI; Prusa Connect and the Prusa mobile app are optional - Prusa states the machine is fully offline capable[8][2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus, microSD card storage, 5 V/1.5 A USB output power (P1 series)[9] | Ethernet, optional Wi-Fi; USB drive for print files. Prusa Connect optional and fully offline operation supported[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC[1] | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB and carbon-fibre composites. Prusa states an open material policy - any brand of 1.75 mm filament, no chips and no subscriptions[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[13][12] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[14] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[15][8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Original Prusa XL+ product page (spec block and variant price data) prusa3d.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab P2S Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab P2S store page us.store.bambulab.com · 2026-08 · vendor
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc