3D Printing InfoPrinter comparison
Bambu Lab P1P vs QIDI Plus4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1P comparisonsMore QIDI Plus4 comparisons
| Property | Bambu Lab P1PCOREXY | QIDI Plus4COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | QIDI |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[1] | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[2][3] |
| Release date (announcement and actual shipping) | Not documented | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[4] |
| Street price (USD; dated snapshot per entry) | Not documented | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[1] | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[3][2] |
| Market position: superseded? successor announced? | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[5][1] | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[6][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[1] | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[1] | 505 x 487 x 550 mm[4] |
| Net weight (kg) | 9.65 kg net, 14.30 kg gross[1] | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[4] |
| Frame construction & material | Open frame; Bambu offers printable mod-plates for the side panels[1] | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[1][5] | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[2][4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[8] | CoreXY[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[8] | Dual independent Z motors on 10 mm linear shafts and screws[2] |
| Belts (type, width, e.g. Gates?) | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[8] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s (manufacturer claim, tool-head maximum)[4] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | <=20,000 mm/s2 (manufacturer claim)[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[8] | Direct drive with hardened steel dual gears, 1.75 mm filament[2][4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[1][8] | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[2][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | <=370 °C claimed. No firmware max_temp verified for this model[2][4] |
| Heater cartridge power (W) | Not documented | 80 W hotend heater (manufacturer figure)[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[2][4] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[2][4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[9][8] | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[4] |
| Multi-material/multi-color capability or official upgrade path | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[8] | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[1] | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Not documented | 450 W plus 400 W for chamber heating (rated)[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[10] | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[8] | 5-inch touchscreen, 800 x 480[2][4] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[8] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[8] | Wi-Fi 2.4 GHz, Ethernet, USB[2][4] |
| Cloud service & phone app; LAN-only mode possible? | Not documented | Mobile and computer control, remote cloud or LAN-only operation[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[1] | Built-in low-frame-rate camera, up to 1080p, timelapse supported[2][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | QIDI claims about 10 minutes from unbox to printing[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[2][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[11] | 1-year coverage, 14-day no-reason return, 30-day price protection[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor