3D Printing InfoPrinter comparison
Bambu Lab P1P vs Creality K2 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1P comparisonsMore Creality K2 Pro comparisons
| Property | Bambu Lab P1PCOREXY | Creality K2 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Creality |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[1] | Creality K2 Pro[2] |
| Street price (USD; dated snapshot per entry) | Not documented | $599.00 and $799.00 are the two variant prices listed on the Creality US store K2 Pro Combo page, Aug 2026 - the combo includes a CFS unit, so neither figure is a bare-printer price[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[1] | Between the K2 (260 mm cube, no chamber heating, 100 C bed, 8 GB) and the K2 Plus (350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi). The K2 Pro shares the K2's 300 C nozzle and 70 W hotend but gets the chamber heater, RFID reader, Ethernet and 32 GB storage[2] |
| Market position: superseded? successor announced? | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[4][1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[1] | 300 x 300 x 300 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[1] | 445 x 477 x 573 mm[2] |
| Net weight (kg) | 9.65 kg net, 14.30 kg gross[1] | 23.7 kg[2] |
| Frame construction & material | Open frame; Bambu offers printable mod-plates for the side panels[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[1][4] | Enclosed with chamber temperature control up to 60 C; one air filter[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 C max chamber temperature (manufacturer figure)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[5] | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[5] | Not documented |
| Belts (type, width, e.g. Gates?) | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[5] | Manual belt tensioning[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | Step-servo motors on the X and Y axes and the extruder[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max printing speed (manufacturer claim)[2] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[5] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[1][5] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heater cartridge power (W) | Not documented | 70 W rated hotend power[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | 110 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[6][5] | Smart auto levelling, plus automatic flow-rate calibration using a nozzle AI camera[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[5] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[1] | One auxiliary cooling fan and one air filter[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[8][9][2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[5] | 4-inch touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[5] | Touch UI with alarm sounds and a built-in RFID reader for automatic filament identification (needs Creality RFID filament)[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[5] | Wi-Fi 2.4 GHz, RJ45 Ethernet, USB drive and a Creality 485 port; 32 GB eMMC[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[1] | One chamber camera at 720p 30 fps, plus a separate nozzle AI camera used for flow calibration[2] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[1] | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[8][9] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[11] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Creality US store - K2 Pro Combo 3D Printer product page (live prices for the variants) store.creality.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor