3D Printing InfoPrinter comparison
Bambu Lab P1P vs Creality Ender-3 V3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab P1P comparisonsMore Creality Ender-3 V3 comparisons
| Property | Bambu Lab P1PCOREXY | Creality Ender-3 V3BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Creality |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[1] | Creality Ender-3 V3, marketed as a CoreXZ machine[2] |
| Street price (USD; dated snapshot per entry) | Not documented | $239.00 on store.creality.com, Aug 2026 (listed as "Ender-3 V3 CoreXZ 3D Printer")[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[1] | Do not confuse with the Ender-3 V3 SE or KE, which are cheaper and slower and use a conventional bed-slinger gantry - only the V3 and V3 Plus use CoreXZ. The V3 Plus is the same idea scaled to 300 x 300 x 330 mm. Creality's own spec table gives the V3 a 110 C bed, where the SE, KE, V4 and K1 series stop at 100 C[2][4][5] |
| Market position: superseded? successor announced? | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[6][1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[1] | 220 x 220 x 250 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[1] | 358 x 374 x 498 mm[2] |
| Net weight (kg) | 9.65 kg net, 14.30 kg gross[1] | 7.83 kg net (Creality); Tom's Hardware rounds it to 7.8 kg[2][7] |
| Frame construction & material | Open frame; Bambu offers printable mod-plates for the side panels[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[1][6] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[8] | CoreXZ kinematics - the X and Z axes are coupled and driven together, with the bed still moving in Y[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[8] | Not documented |
| Belts (type, width, e.g. Gates?) | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[8] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s max printing speed (manufacturer claim; Creality Lab states the typical speed is 300 mm/s)[2][4] |
| Recommended/typical print speed | Not documented | 300 mm/s typical printing speed (Creality Lab figure quoted on the sibling V3 Plus page for the same CoreXZ platform)[4] |
| Max acceleration (claimed, mm/s²) | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20000 mm/s2 max acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[8] | New high-speed direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[1][8] | Quick-swap nozzle with a hardened steel tip integrated with the heatbreak (Creality's "unicorn" nozzle), replaced as a unit[2][7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C max build-plate temperature[1] | 110 C max heatbed temperature - higher than the rest of the Ender-3 V3 family[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[1] | PEI flexible build plate, removable spring steel[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[9][8] | Auto levelling with automatic Z offset (Creality states auto levelling; Tom's Hardware records "Automatic + Z")[2][7] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - filament run-out sensor[1] | Filament run-out sensor fitted[2] |
| Multi-material/multi-color capability or official upgrade path | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[8] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard (Creality does not name the board or MCU)[2] |
| Total rated power draw | Not documented | Rated power 350 W; input 100-120 V / 200-240 V, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[10] | Creality Print slicing ecosystem; input shaping with an included G-sensor accelerometer. Creality does not name the firmware base on the V3 page (the sibling KE page states Creality OS is Klipper-based)[2][11] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[8] | 4.3-inch HD colour touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[8] | Colour touch UI; power-loss recovery; file transfer from USB drive, WLAN or Creality Cloud[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[8] | Wi-Fi; USB drive, WLAN and Creality Cloud file transfer[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[1] | AI camera optional, not fitted as standard[2] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[1] | PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and Creality CR-carbon[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[12] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[13] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Not documented | Benchy in 14 minutes 54 seconds under Speed Boat Rules in ordinary grey PLA - independently measured by Tom's Hardware[7] |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware rating 4.5 out of 5 in the page's structured data[7] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Creality Ender-3 V3 product page (full specification table) creality.com · 2026-08 · vendor
- Creality US store - Ender-3 V3 CoreXZ 3D Printer product page (live price) store.creality.com · 2026-08 · vendor
- Creality Ender-3 V3 Plus product page creality.com · 2026-08 · vendor
- Creality Ender-3 V4 product page (full specification table) creality.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Tom's Hardware - Creality Ender 3 V3 Review (spec box and Speed Boat Rules Benchy time) tomshardware.com · 2026-08 · review
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Creality Ender-3 V3 KE product page creality.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor