3D Printing InfoPrinter comparison
Bambu Lab H2S vs Phrozen Sonic Mighty Revo 14K
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2S comparisonsMore Phrozen Sonic Mighty Revo 14K comparisons
| Property | Bambu Lab H2SCOREXY | Phrozen Sonic Mighty Revo 14KRESIN |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Phrozen |
| Class | COREXY | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2S; spec sheet header "H2S & H2S Laser Edition Spec Sheet"[1] | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[2][3][4] |
| Street price (USD; dated snapshot per entry) | From $1,199.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,249.00[5] | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[4][3][2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Single-nozzle machine sharing the H2 body. H2S and H2S Laser Edition are covered by one spec sheet: the Laser Edition adds laser safety windows, the air-assist pump and the 3264x2448 BirdsEye camera, and a plain H2S can be upgraded with a Laser Upgrade Kit. Against the dual-nozzle H2D in the same 492x514x626 mm shell: 30 kg vs 31 kg, 340x320x340 mm single-nozzle volume vs 325x320x325 mm[1][6] | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[3][2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 340 x 320 x 340 mm (manufacturer figure)[1] | 223 x 126 x 235 mm[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm - the same body as the H2D and H2C[1] | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[4][2] |
| Net weight (kg) | 30 kg net[1] | 18 kg[4] |
| Frame construction & material | Aluminium and steel chassis and shell[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, G3 + H12 + coconut-shell carbon filtration[1] | Open-frame MSLA with a UV-blocking cover[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; grouped by Bambu with the H2 enclosed CoreXY machines at 20000 mm/s2[1] | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[2][4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear guide rails with a ball screw[2][4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s standard-flow hotend, 65 mm3/s optional high-flow hotend; Bambu's test is a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel gears and a Bambu high-precision permanent-magnet synchronous extruder motor; built-in filament cutter[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend, hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; optional high-flow hotend[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, hotend cooling fan, main control board fan, chamber exhaust fan, chamber heat-circulation fan and auxiliary part-cooling fan, all closed-loop controlled[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz[4] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2050 W at 220 V, 1170 W at 110 V[1] | 240 W maximum system power[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] | Not named. File formats accepted are .ctb and .prz[2][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 5-inch touch panel (control panel — not the masking LCD, see W1)[2][4] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Built-in 8 GB eMMC and a USB port; touchscreen, app and PC control interfaces[1] | USB and Wi-Fi[2][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live-view camera 1920x1080 and toolhead camera 1600x1200; the 3264x2448 BirdsEye camera is fitted only on the Laser Edition[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA and PPS[1] | 405 nm photopolymer resin; no closed compatibility list published[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[8] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[4][2] |
| Light source | Not documented | Linear projection LED module. Wavelength not published[4] |
| Layer height range | Not documented | 0.01-0.30 mm[4] |
| Release film | Not documented | nFEP film supplied. No rated life published[2][4] |
| Resin vat & feeding | Not documented | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[2][4] |
| Fume extraction | Not documented | Plug-in air purifier supplied with the machine[2] |
| Throughputlayers/h | Not documented | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[4][2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor