3D Printing InfoPrinter comparison
Bambu Lab H2D vs QIDI Q1 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2D comparisonsMore QIDI Q1 Pro comparisons
| Property | Bambu Lab H2DCOREXY | QIDI Q1 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | QIDI |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2D[1] | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[2] |
| Release date (announcement and actual shipping) | Not documented | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | From $1,549.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,749.00; the product page shows $1,749.00 (typical $1,999.00) with a combo variant selected[4][5] | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Six SKUs on one product page including H2D, H2D AMS Combo and H2D Laser Full Combo. The Laser Edition adds laser safety windows and the air-assist pump; a plain H2D can be upgraded with a Laser Upgrade Kit. The BirdsEye camera is only fitted on the Laser Edition. Siblings in the same family are the H2S (single nozzle, 340x320x340 mm, 30 kg) and H2C (dual nozzle, 305x320x325 mm single-nozzle volume, 32.5 kg, four cameras as standard) - all three share the 492x514x626 mm body, so body dimensions alone will not tell them apart[1][6][7] | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[2][3] |
| Market position: superseded? successor announced? | Current model; the H2C sits above it in the same body at $2,199 and the H2S below it at $1,199[4] | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | Single-nozzle printing 325 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 320 mm; total volume across the two nozzles 350 x 320 x 320 mm. The sortable figure is the single-nozzle volume[1] | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[2][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm[1] | 477 x 467 x 489 mm machine dimensions (QIDI)[2][8] |
| Net weight (kg) | 31 kg net[1] | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[2][8] |
| Frame construction & material | Aluminium, steel, plastic and glass chassis and shell[1] | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, and a G3 + H12 HEPA + granulated coconut-shell carbon filter stack[1] | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[2][8] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[2][8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; Bambu groups the H2 series with its enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY[8] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[8] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Independent dual Z lead-screw motors[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[2][8] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | <=20,000 mm/s2 (manufacturer claim)[2][8] |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s with the standard-flow hotend, 65 mm3/s with the optional high-flow hotend; both measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual direct-drive extruders with hardened-steel gears, driven by Bambu high-precision permanent-magnet synchronous motors[1] | Direct-drive extruder with hardened steel gears[2][8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend with hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; an optional high-flow hotend is offered[1] | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[2][8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | <=350 °C claimed. No firmware max_temp verified for this model[2][8] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | <=120 °C claimed. No firmware limit verified for this model[2][8] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Double-sided textured PEI plate on an aluminium substrate bed[2][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[8] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, auxiliary part-cooling fan, chamber heat-circulation fan, hotend cooling fan, main control board fan and chamber exhaust fan, all closed-loop controlled[1] | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[8] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[8] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2200 W at 220 V, 1320 W at 110 V. The US store page states the H2D it sells is the 100-120 V version[1] | 350 W plus 300 W for chamber heating (rated)[2][8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[9] | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 4.3-inch touchscreen, 272 x 480[2][8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Studio, Bambu Suite and Bambu Handy[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi (802.11 a/b/g/n, 2.4 and 5 GHz), built-in 8 GB eMMC and a USB port[1] | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Four cameras listed: live view 1920x1080, nozzle camera 1920x1080, toolhead camera 1920x1080, and a 3264x2448 BirdsEye camera fitted only on the Laser Edition[1] | Built-in camera, up to 1080p, timelapse supported. Framerate not published[2][8] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Ships fully assembled[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed as a feature; mechanism not published[8] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS and PPS-CF/GF[1] | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[11] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D store page us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab H2C Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor