3D Printing InfoPrinter comparison
Bambu Lab H2D vs QIDI Plus5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab H2D comparisonsMore QIDI Plus5 comparisons
| Property | Bambu Lab H2DCOREXY | QIDI Plus5COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | QIDI |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab H2D[1] | QIDI Plus5, sold as "QIDI Plus5 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Launched 5 August 2026, 09:00 EDT / 15:00 CEST[4] |
| Launch MSRP (USD) | Not documented | $749 regular launch price; a launch-window member discount put it under $700[4] |
| Street price (USD; dated snapshot per entry) | From $1,549.00 on the Bambu Lab US store, Aug 2026, against a stated typical price of $1,749.00; the product page shows $1,749.00 (typical $1,999.00) with a combo variant selected[5][6] | $749.00 for the standard model on us.qidi3d.com, checked Aug 2026. Other variants: Polar Cooler bundle $899.00, Plus5 Combo $899.00, Combo + Polar Cooler $1,049.00. No compare-at price listed[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Six SKUs on one product page including H2D, H2D AMS Combo and H2D Laser Full Combo. The Laser Edition adds laser safety windows and the air-assist pump; a plain H2D can be upgraded with a Laser Upgrade Kit. The BirdsEye camera is only fitted on the Laser Edition. Siblings in the same family are the H2S (single nozzle, 340x320x340 mm, 30 kg) and H2C (dual nozzle, 305x320x325 mm single-nozzle volume, 32.5 kg, four cameras as standard) - all three share the 492x514x626 mm body, so body dimensions alone will not tell them apart[1][7][8] | Four purchase variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), and Combo + Polar Cooler. The Polar Cooler is a pre-sale add-on shipping separately, so its specs are not Plus5 specs. Replaces the Plus4 (305x305x280, 450 W + 400 W chamber)[2][4] |
| Market position: superseded? successor announced? | Current model; the H2C sits above it in the same body at $2,199 and the H2S below it at $1,199[5] | Current flagship of QIDI's large-format line as of Aug 2026; sits below the Max4 (390x390x340)[2][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | Single-nozzle printing 325 x 320 x 325 mm; dual-nozzle printing 300 x 320 x 320 mm; total volume across the two nozzles 350 x 320 x 320 mm. The sortable figure is the single-nozzle volume[1] | 320 x 320 x 300 mm advertised — QIDI states this is about 18% more volume than the Plus4[2][3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 492 x 514 x 626 mm[1] | 500 x 488 x 558 mm[3] |
| Net weight (kg) | 31 kg net[1] | 29.0 kg net[3] |
| Frame construction & material | Aluminium, steel, plastic and glass chassis and shell[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a door sensor; active chamber heating to 65 C, chamber exhaust and heat-circulation fans, and a G3 + H12 HEPA + granulated coconut-shell carbon filter stack[1] | Fully enclosed, with a 3-stage air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active chamber heating, maximum 65 C (manufacturer figure)[1] | 65 °C, actively heated, 550 W chamber heater — reported as a 37.5% increase in heater power over the Plus4 (manufacturer claim)[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - not named in the spec sheet; Bambu groups the H2 series with its enclosed CoreXY machines at 20000 mm/s2[1] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | High-precision linear rails on X[2][4] |
| Belts (type, width, e.g. Gates?) | Not documented | 1.5GT belts, 9 mm wide — wider than the 2GT 6 mm belts common in this class[2][4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 1000 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 600 mm/s (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | <=20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | 40 mm3/s with the standard-flow hotend, 65 mm3/s with the optional high-flow hotend; both measured by Bambu on a 250 mm round single-wall model in Bambu ABS at 280 C[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Resonance compensation listed as a feature; implementation not named on the product page[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual direct-drive extruders with hardened-steel gears, driven by Bambu high-precision permanent-magnet synchronous motors[1] | Direct drive with hardened dual gears[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend with hardened-steel nozzle, 0.4 mm included, 0.2/0.4/0.6/0.8 mm supported; an optional high-flow hotend is offered[1] | Ceramic heating-plate hotend with a bimetal nozzle; 0.4 mm standard, 0.2/0.6/0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C claimed max nozzle temperature[1] | <=370 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | <=120 °C claimed, described by QIDI as an even-heating bed[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate and Smooth PEI plate supported[1] | Aluminium silicone heated bed with a dual-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic levelling using an integrated load cell; QIDI describes it as direct nozzle-contact detection[3][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, tangle sensor and door sensor; odometry with AMS[1] | Filament run-out sensor, plus a filament cutter[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan, auxiliary part-cooling fan, chamber heat-circulation fan, hotend cooling fan, main control board fan and chamber exhaust fan, all closed-loop controlled[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon; QIDI claims 99.5% capture of airborne particles and dust[2][3][4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100/240 VAC, 50/60 Hz[3] |
| Total rated power draw | 100-120 VAC / 200-240 VAC 50/60 Hz; 2200 W at 220 V, 1320 W at 110 V. The US store page states the H2D it sells is the 100-120 V version[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[10] | Not stated on the product page. QIDI's slicer ecosystem is QIDI Studio, and Orca/PrusaSlicer are listed as supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch 720x1280 touchscreen[1] | 4-inch touchscreen, 480 x 320[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Studio, Bambu Suite and Bambu Handy[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi (802.11 a/b/g/n, 2.4 and 5 GHz), built-in 8 GB eMMC and a USB port[1] | Wi-Fi 2.4 GHz / 5 GHz, Ethernet, USB; 32 GB eMMC storage plus USB 2.0 flash drive[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Four cameras listed: live view 1920x1080, nozzle camera 1920x1080, toolhead camera 1920x1080, and a 3264x2448 BirdsEye camera fitted only on the Laser Edition[1] | AI camera with failure detection, up to 1080p, timelapse supported (low frame rate)[2][3][4] |
| LED chamber/toolhead lighting | Not documented | RGB status light[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, plus carbon/glass-fibre reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS and PPS-CF/GF[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, carbon- and glass-fibre-reinforced polymers[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[11] | QIDI store terms: 1-year coverage, lifetime tech guidance, 14-day no-reason return[9] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab H2D - Technical Specifications bambulab.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Plus5 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2D store page us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab H2S & H2S Laser Edition Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab H2C Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor