3D Printing InfoPrinter comparison
Bambu Lab A2L vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab A2L comparisonsMore Sovol SV08 comparisons
| Property | Bambu Lab A2LBEDSLINGER | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab A2L[1] | Sovol SV08 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Pre-orders opened 1 June 2026 (Tom's Hardware spec box); Tom's Hardware review published 27 June 2026[4] | Not documented |
| Launch MSRP (USD) | $469 standalone, $569 Combo at launch[4] | Not documented |
| Street price (USD; dated snapshot per entry) | From $469.00 on the Bambu Lab US store, Aug 2026[5] | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Standalone and Combo (with AMS lite) SKUs, and an optional cutting/drawing module (blade cutter and pen plotter, 300x300 mm cutting area) that is a separate attachment, not a printer variant. Do not carry A1 or A1 mini figures across: the A2L is a different, much larger machine at 12.8 kg[1][4] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][6][7][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 320 x 325 mm (manufacturer figure)[1] | 350 x 350 x 345 mm advertised[2][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 544 x 529 x 505 mm[1] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][7] |
| Net weight (kg) | 12.8 kg net[1] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[7] |
| Frame construction & material | Aluminium and steel chassis with a plastic outer frame; Tom's Hardware describes a triangular gantry frame the base drops into[1] | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger - Tom's Hardware's assembly description has the heatbed bolting to a Y-carriage inside the gantry frame[4] | CoreXY[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not published in the spec sheet; no teardown source found that documents the Z drive[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim)[1] | 700 mm/s maximum (manufacturer claim)[2][7] |
| Max acceleration (claimed, mm/s²) | 10 m/s2 = 10000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][7] |
| Max volumetric flow claimed (mm³/s) | 28 mm3/s claimed, measured by Bambu on a 150 mm round single-wall model in Bambu PLA Basic at 220 C - note this test uses PLA, unlike the ABS-based figures Bambu quotes for its enclosed machines, so it is not directly comparable[1] | <=30 mm3/s (manufacturer claim)[2][7] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a servo extruder motor and hardened-steel extruder gears; built-in filament cutter[1] | Planetary-gear direct-drive extruder[2][7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Stainless-steel nozzle; 0.2/0.4/0.6/0.8 mm supported. Bambu's A2L sheet does not state whether the hotend is all-metal[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | <=300 °C claimed[2][7] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 C max heatbed temperature[1] | <=100 °C claimed[2][7] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate included; Engineering Plate and Cool Plate SuperTack also supported[1] | Powder-coated PEI steel plate[2][7] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling with automatic Z: Tom's Hardware confirms the nozzle is used as the probe and the machine can re-check level before each print[4] | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][7][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, filament odometry, tangle sensor and clumping detection[1] | Filament sensor fitted, with filament-runout resume; type and location not published[2][7] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan and hotend cooling fan, both closed-loop controlled. No auxiliary part-cooling fan and no chamber fan[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][7] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][7] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[8] | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 240x320 touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | 2.4 GHz Wi-Fi only (802.11 b/g/n), Bambu-Bus, microSD card. Ethernet not available[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][7] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-frame-rate camera, up to 1080p, timelapse supported[1] | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][7] |
| Materials Support | ||
| Officially supported filament list | Suitable: PLA, PETG, TPU, PVA. PLA-CF and PETG-CF suitable only after fitting a hardened-steel nozzle. ABS, ASA, PA, PC and PET are listed as not recommended on the compare page[1][9] | PLA, PETG, TPU, PETG-CF, ABS and others[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[10] | Not documented |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (27 June 2026)[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab A2L Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A2L 3D printer review, 27 June 2026 tomshardware.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor