3D Printing InfoPrinter comparison
Bambu Lab A2L vs Bambu Lab P1P
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab A2L comparisonsMore Bambu Lab P1P comparisons
| Property | Bambu Lab A2LBEDSLINGER | Bambu Lab P1PCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Bambu Lab |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab A2L[1] | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[2] |
| Release date (announcement and actual shipping) | Pre-orders opened 1 June 2026 (Tom's Hardware spec box); Tom's Hardware review published 27 June 2026[3] | Not documented |
| Launch MSRP (USD) | $469 standalone, $569 Combo at launch[3] | Not documented |
| Street price (USD; dated snapshot per entry) | From $469.00 on the Bambu Lab US store, Aug 2026[4] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Standalone and Combo (with AMS lite) SKUs, and an optional cutting/drawing module (blade cutter and pen plotter, 300x300 mm cutting area) that is a separate attachment, not a printer variant. Do not carry A1 or A1 mini figures across: the A2L is a different, much larger machine at 12.8 kg[1][3] | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[2] |
| Market position: superseded? successor announced? | Not documented | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[4][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 320 x 325 mm (manufacturer figure)[1] | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 544 x 529 x 505 mm[1] | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[2] |
| Net weight (kg) | 12.8 kg net[1] | 9.65 kg net, 14.30 kg gross[2] |
| Frame construction & material | Aluminium and steel chassis with a plastic outer frame; Tom's Hardware describes a triangular gantry frame the base drops into[1] | Open frame; Bambu offers printable mod-plates for the side panels[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger - Tom's Hardware's assembly description has the heatbed bolting to a Y-carriage inside the gantry frame[3] | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not published in the spec sheet; no teardown source found that documents the Z drive[1] | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[5] |
| Belts (type, width, e.g. Gates?) | Not documented | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim)[1] | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Max acceleration (claimed, mm/s²) | 10 m/s2 = 10000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | 28 mm3/s claimed, measured by Bambu on a 150 mm round single-wall model in Bambu PLA Basic at 220 C - note this test uses PLA, unlike the ABS-based figures Bambu quotes for its enclosed machines, so it is not directly comparable[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a servo extruder motor and hardened-steel extruder gears; built-in filament cutter[1] | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Stainless-steel nozzle; 0.2/0.4/0.6/0.8 mm supported. Bambu's A2L sheet does not state whether the hotend is all-metal[1] | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[2][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max nozzle temperature[1] | 300 C claimed max hot-end temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 C max heatbed temperature[1] | 100 C max build-plate temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate included; Engineering Plate and Cool Plate SuperTack also supported[1] | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling with automatic Z: Tom's Hardware confirms the nozzle is used as the probe and the machine can re-check level before each print[3] | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[6][5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, filament odometry, tangle sensor and clumping detection[1] | Yes - filament run-out sensor[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[5] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan and hotend cooling fan, both closed-loop controlled. No auxiliary part-cooling fan and no chamber fan[1] | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 240x320 touchscreen[1] | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[5] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus mobile app and PC app[1] | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | 2.4 GHz Wi-Fi only (802.11 b/g/n), Bambu-Bus, microSD card. Ethernet not available[1] | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-frame-rate camera, up to 1080p, timelapse supported[1] | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[2] |
| Materials Support | ||
| Officially supported filament list | Suitable: PLA, PETG, TPU, PVA. PLA-CF and PETG-CF suitable only after fitting a hardened-steel nozzle. ABS, ASA, PA, PC and PET are listed as not recommended on the compare page[1][8] | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[9] | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[9] |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (27 June 2026)[3] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab A2L Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A2L 3D printer review, 27 June 2026 tomshardware.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor