3D Printing InfoPrinter comparison
Bambu Lab A1 mini vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab A1 mini comparisonsMore Sovol Zero comparisons
| Property | Bambu Lab A1 miniBEDSLINGER | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab A1 mini. Store title: "Bambu Lab A1 mini 3D Printer"[1] | Sovol Zero 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Shipped in the second half of 2023; Tom's Hardware published its A1 mini review on 13 October 2023, ahead of the full-size A1 review of 14 December 2023[4][5] | Not documented |
| Street price (USD; dated snapshot per entry) | From $219.00 (base A1 mini) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the product page lists A1 mini and A1 mini Combo variants[6][7] | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[2][3][8] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two SKUs: A1 mini and A1 mini Combo (adds the AMS lite). Distinguish from the full-size A1 by build volume (180 vs 256 mm cube), bed ceiling (80 vs 100 C), screen (2.4 vs 3.5 inch), Z drive (single leadscrew with a coupling vs dual leadscrews belt-synced) and weight (5.5 vs 8.3 kg)[1][9][10][11] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[2][8][12] |
| Market position: superseded? successor announced? | Still the entry model in the Bambu Lab US store line-up in Aug 2026 and the cheapest machine listed[6] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 180 mm (manufacturer figure)[1] | 152.4 x 152.4 x 152.5 mm advertised[2][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 347 x 315 x 365 mm (Bambu tech specs; Tom's Hardware prints 347 x 314 x 365 mm)[1][4] | 345 x 420 x 475 mm[2] |
| Net weight (kg) | 5.5 kg net[1] | Not documented |
| Frame construction & material | Steel plus extruded aluminium chassis[1] | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[8] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed[8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger: toolhead on an X guide rail and crossbeam, print platform moving in Y on a guide rail, toolhead carried in Z[10] | CoreXY[8] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Horizontal linear guide rail with the printhead on a sliding block; rail size not published[10] | Linear rails on all axes[8] |
| Y-axis guide type | Horizontal linear guide rail carrying the print platform, belt-driven in Y[10] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Single leadscrew with nut, coupling and stepper motor - the motor drives the leadscrew directly through the coupling. This is the clearest hardware difference from the A1, which uses two leadscrews synchronised by a belt[10][11] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[2][8] |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[2][8] |
| Max volumetric flow claimed (mm³/s) | 28 mm3/s claimed on a 150x150 mm single-wall model in Bambu ABS at 280 C - note this is the ABS figure quoted for a machine whose own spec sheet lists ABS as not recommended[1] | <=50 mm3/s (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel extruder gears; toolhead also holds the cutter unit, filament hub and filament sensor[1][10] | Planetary-gear direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal integrated hotend (nozzle plus heatsink in one unit), quick-swap; stainless-steel nozzle, 0.4 mm included, 0.2/0.6/0.8 mm optional[1][10] | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | <=350 °C claimed[2][8] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 C max build-plate temperature - the lowest of the current Bambu range, and the reason ABS/ASA are listed as not recommended[1][10] | <=120 °C claimed; Sovol states the bed is AC-heated[2][8] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Smooth PEI and Dual-Texture PEI plates also compatible[1] | Double-sided PEI steel plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch automatic bed levelling and automatic Z-offset; Tom's Hardware confirms the nozzle itself is the probe[4][10] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[2][8] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, filament odometry and filament-tangle sensor[1] | Filament sensor fitted; type and location not published[2][8] |
| Multi-material/multi-color capability or official upgrade path | Optional AMS lite (A1 mini Combo); AMS / AMS 2 Pro / AMS HT need an AMS HUB (SA013) accessory[7] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One custom 5015 centrifugal part-cooling fan with two opposing outlets; closed-loop control. A separate MC board cooling fan is also fitted[1][10] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Bambu names the motion controller as a dual-core Cortex-M4; no board model or chip markings published[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[2][8] |
| Total rated power draw | 100-240 VAC 50/60 Hz; max power 150 W for the whole machine. Bed heater wattage is not published separately[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[13] | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[2][8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch 320x240 IPS touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Handy app and Bambu Studio PC application[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only (802.11 b/g/n), Bambu-Bus, microSD card. No Ethernet, no USB host[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-rate camera, up to 1080p, timelapse supported[1] | Built-in camera for monitoring; resolution not published[2][8] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Arrives mostly pre-assembled - only the filament wiper, spool holder and Bowden tubes to fit[4] | Arrives preassembled[8] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2][8] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA. Not recommended: ABS, ASA, PC, PA, PET and fibre-reinforced polymers[1] | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only: the US store page claims "49dB Whisper-Quiet Operation" - the identical sentence appears on the A1 page, so treat it as line-level marketing copy rather than a per-model measurement. No independent dB measurement with a stated distance was found[7][14] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[15] | Not documented |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (13 October 2023)[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab A1 mini - Technical Specifications bambulab.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A1 Mini Review, 13 October 2023 tomshardware.com · 2026-08 · review
- Tom's Hardware - Bambu Lab A1 Review, Denise Bertacchi, 14 December 2023 tomshardware.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab A1 mini store page (A1 mini / A1 mini Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- Bambu Lab A1 - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - A1 mini introduction wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - A1 introduction wiki.bambulab.com · 2026-08 · doc
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab A1 store page (A1 / A1 Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor