3D Printing InfoPrinter comparison
Bambu Lab A1 mini vs QIDI Max4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Bambu Lab A1 mini comparisonsMore QIDI Max4 comparisons
| Property | Bambu Lab A1 miniBEDSLINGER | QIDI Max4COREXY |
|---|---|---|
| Identity | ||
| Brand | Bambu Lab | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Bambu Lab A1 mini. Store title: "Bambu Lab A1 mini 3D Printer"[1] | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Shipped in the second half of 2023; Tom's Hardware published its A1 mini review on 13 October 2023, ahead of the full-size A1 review of 14 December 2023[4][5] | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[2][6] |
| Street price (USD; dated snapshot per entry) | From $219.00 (base A1 mini) on the Bambu Lab US store, Aug 2026, during an advertised Back-to-School sale; the product page lists A1 mini and A1 mini Combo variants[7][8] | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two SKUs: A1 mini and A1 mini Combo (adds the AMS lite). Distinguish from the full-size A1 by build volume (180 vs 256 mm cube), bed ceiling (80 vs 100 C), screen (2.4 vs 3.5 inch), Z drive (single leadscrew with a coupling vs dual leadscrews belt-synced) and weight (5.5 vs 8.3 kg)[1][9][10][11] | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[2][6] |
| Market position: superseded? successor announced? | Still the entry model in the Bambu Lab US store line-up in Aug 2026 and the cheapest machine listed[7] | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[2][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 180 mm (manufacturer figure)[1] | 390 x 390 x 340 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 347 x 315 x 365 mm (Bambu tech specs; Tom's Hardware prints 347 x 314 x 365 mm)[1][4] | 558 x 578 x 612 mm[3] |
| Net weight (kg) | 5.5 kg net[1] | 46.5 kg net[3] |
| Frame construction & material | Steel plus extruded aluminium chassis[1] | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger: toolhead on an X guide rail and crossbeam, print platform moving in Y on a guide rail, toolhead carried in Z[10] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Horizontal linear guide rail with the printhead on a sliding block; rail size not published[10] | Not documented |
| Y-axis guide type | Horizontal linear guide rail carrying the print platform, belt-driven in Y[10] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Single leadscrew with nut, coupling and stepper motor - the motor drives the leadscrew directly through the coupling. This is the clearest hardware difference from the A1, which uses two leadscrews synchronised by a belt[10][11] | 2 mm lead Z screw with an anti-backlash nut[2] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | FOC closed-loop stepper motors[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[1] | 800 mm/s (manufacturer claim, maximum)[3] |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 max toolhead acceleration (manufacturer claim)[1] | 30,000 mm/s2 (manufacturer claim, maximum)[3] |
| Max volumetric flow claimed (mm³/s) | 28 mm3/s claimed on a 150x150 mm single-wall model in Bambu ABS at 280 C - note this is the ABS figure quoted for a machine whose own spec sheet lists ABS as not recommended[1] | 40 mm3/s rated flow (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaper listed as a feature[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened-steel extruder gears; toolhead also holds the cutter unit, filament hub and filament sensor[1][10] | Direct drive, dual hardened-steel gears, 8.9:1 reduction[3] |
| Gear ratio & drive gear material | Not documented | 8.9:1; drive gears hardened steel[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal integrated hotend (nozzle plus heatsink in one unit), quick-swap; stainless-steel nozzle, 0.4 mm included, 0.2/0.6/0.8 mm optional[1][10] | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C claimed max hot-end temperature[1] | <=370 °C claimed[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 C max build-plate temperature - the lowest of the current Bambu range, and the reason ABS/ASA are listed as not recommended[1][10] | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Textured PEI plate; Smooth PEI and Dual-Texture PEI plates also compatible[1] | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Nozzle-touch automatic bed levelling and automatic Z-offset; Tom's Hardware confirms the nozzle itself is the probe[4][10] | Automatic levelling; probe technology not named by QIDI[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Yes - run-out sensor, filament odometry and filament-tangle sensor[1] | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[3] |
| Multi-material/multi-color capability or official upgrade path | Optional AMS lite (A1 mini Combo); AMS / AMS 2 Pro / AMS HT need an AMS HUB (SA013) accessory[8] | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[2][3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | One custom 5015 centrifugal part-cooling fan with two opposing outlets; closed-loop control. A separate MC board cooling fan is also fitted[1][10] | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Bambu names the motion controller as a dual-core Cortex-M4; no board model or chip markings published[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 110 V / 220-240 V AC, 50/60 Hz[3] |
| Total rated power draw | 100-240 VAC 50/60 Hz; max power 150 W for the whole machine. Bed heater wattage is not published separately[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[12] | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch 320x240 IPS touchscreen[1] | 5-inch touchscreen, 480 x 800[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Bambu Handy app and Bambu Studio PC application[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only (802.11 b/g/n), Bambu-Bus, microSD card. No Ethernet, no USB host[1] | Wi-Fi, LAN, USB[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-rate camera, up to 1080p, timelapse supported[1] | AI camera with print-failure detection[2][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Arrives mostly pre-assembled - only the filament wiper, spool holder and Bowden tubes to fit[4] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | Ideal: PLA, PETG, TPU, PVA. Not recommended: ABS, ASA, PC, PA, PET and fibre-reinforced polymers[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Manufacturer claim only: the US store page claims "49dB Whisper-Quiet Operation" - the identical sentence appears on the A1 page, so treat it as line-level marketing copy rather than a per-model measurement. No independent dB measurement with a stated distance was found[8][13] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[14] | 1-year coverage, lifetime tech guidance, 14-day no-reason return[2] |
| Independently Measured Performance | ||
| Review scores from major outlets (list outlet + score + date) | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (13 October 2023)[4] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Bambu Lab A1 mini - Technical Specifications bambulab.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- Tom's Hardware - Bambu Lab A1 Mini Review, 13 October 2023 tomshardware.com · 2026-08 · review
- Tom's Hardware - Bambu Lab A1 Review, Denise Bertacchi, 14 December 2023 tomshardware.com · 2026-08 · review
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab A1 mini store page (A1 mini / A1 mini Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab A1 - Technical Specifications bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - A1 mini introduction wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - A1 introduction wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab A1 store page (A1 / A1 Combo variants) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor