3D Printing InfoPrinter comparison
Anycubic Vyper vs ELEGOO Centauri Carbon 2 Combo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Vyper comparisonsMore ELEGOO Centauri Carbon 2 Combo comparisons
| Property | Anycubic VyperBEDSLINGER | ELEGOO Centauri Carbon 2 ComboCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Vyper[1] | ELEGOO Centauri Carbon 2 Combo[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 22 May 2021 (Shopify publish date)[1] | Listed on the ELEGOO US store from 9 August 2026 (Shopify publish date)[3] |
| Street price (USD; dated snapshot per entry) | $359.00 on store.anycubic.com, Aug 2026, with the compare-at price also $359.00 (no discount running) - notably more than the newer and much faster Kobra 2 at $169[1][4] | $399.00 on us.elegoo.com, Aug 2026, against a compare-at price of $449.00[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A 2021-generation machine still on sale next to the far faster Kobra line. Its defining differences from every Kobra here: a Bowden extruder rather than direct drive, a 180 mm/s ceiling rather than 300-600 mm/s, and 16-point levelling rather than LeviQ 2.0/3.0. Do not read Kobra performance figures onto it[1][4][5] | The Centauri Carbon 2 sold with the CANVAS multicolour unit. Every printing figure matches the bare Centauri Carbon 2; what changes is the body - 500 x 480 x 743 mm and 19.35 kg with CANVAS fitted - and CANVAS capability being listed Yes. Against the first-generation Centauri Carbon: 350 C nozzle rather than 320 C, clog detection added, and a HEPA plus coconut-shell carbon filter stack rather than the nano mineral crystal filter. An ELEGOO x emoji collaboration edition of the same machine is also listed[2][6][7][8] |
| Market position: superseded? successor announced? | Effectively superseded by the Kobra line, but still listed for sale on the Anycubic store in Aug 2026[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 245 x 245 mm stated as HWD, i.e. 245 x 245 x 260 mm in the usual X x Y x Z order; Anycubic quotes a 15.6 L build volume[1] | 256 x 256 x 256 mm; printing platform 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 516 x 508 x 457 mm stated as HWD, so the desk footprint is about 508 x 457 mm[1] | 500 x 480 x 743 mm with the CANVAS unit fitted[2] |
| Net weight (kg) | 10 kg[1] | 19.35 kg net, 23.8 kg gross[2] |
| Frame construction & material | Not documented | Integrated die-cast aluminium construction (Centauri Carbon platform)[7] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed; the Centauri Carbon 2 uses a HEPA plus granulated coconut-shell activated-carbon filter stack rather than the first generation's nano mineral crystal filter, and adds a smart exhaust grille[6][7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger[1] | CoreXY[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three lead screws with three linear guide rods[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209 silent drivers on a 32-bit mainboard with a Cortex-M3 class main control chip - one of the few Anycubic machines where the driver part number is published[1] | "Silent Drive (All Axes)"; no driver part number published[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum print speed with 80 mm/s recommended (manufacturer figures)[1] | 500 mm/s or less, with 250 mm/s given as the recommended speed[2] |
| Recommended/typical print speed | 80 mm/s typical/recommended print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 maximum acceleration; default 10000 mm/s2[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Anycubic's own Bowden extruder - not direct drive[1] | Dual-gear direct extruder with one fan[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C operational nozzle temperature ceiling[1] | 350 C claimed max nozzle temperature - 30 C above the first-generation Centauri Carbon[2][7] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C operational hot bed temperature ceiling[1] | 110 C max heated bed temperature at 25 C ambient[2] |
| Bed surface (material, texture, coating), single/double-sided | PEI-coated stainless spring steel magnetic flexible platform, chosen by Anycubic over carborundum glass to avoid arching[1] | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic levelling[1] | 121-point auto-levelling with full-auto calibration[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor, clog detection, auto filament unloading and power-loss recovery[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | CANVAS multi-material capability included - the defining difference from the bare Centauri Carbon 2[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[2] |
| Total rated power draw | 100-240 V AC 50/60 Hz input; 24 V / 14.6 A (350 W) output[1] | 1100 W at 220 V, 350 W at 110 V rated; 24 V output[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch LCD touch-control screen[1] | 5-inch colour capacitive touch screen (the first-generation Centauri Carbon used a 4.3-inch panel)[2][7] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour touch UI; LED lighting fitted; STL, OBJ, 3MF and STEP input[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | TransFlash (microSD) card; USB cable connection is flagged by Anycubic as being for expert users only[1] | USB and Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera fitted[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular design with 4 major pre-assembled modules[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU and wood-filled filament[1] | Ideal: PLA, PETG, ABS, ASA. Capable: TPU, PC, PA, PET and fibre-reinforced filaments[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Operating sound published as 45 dB or less - a manufacturer figure with no distance or method stated, and 10 dB below the first-generation Centauri Carbon's published figure[2][7] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[9] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[10] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Vyper store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 Combo Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor