3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 vs QIDI Q1 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 comparisonsMore QIDI Q1 Pro comparisons
| Property | ANYCUBIC Photon Mono M7RESIN | QIDI Q1 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7[1][2] | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[3] |
| Release date (announcement and actual shipping) | Not documented | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[3][4] |
| Street price (USD; dated snapshot per entry) | $493.00 on store.anycubic.com against a $597.00 compare-at price, in stock and quoted as shipping in 24 hours, checked Aug 2026[1] | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinct from the Photon Mono M7 Pro, which shares the 223 x 126 x 230 mm envelope and a 10.1-inch 14K LCD but adds LighTurbo 3.0 optics, a heated peristaltic-pump vat and auto resin refill, and runs 170 vs 150 mm/h on high-speed resin. The M5s is a different machine again (12K, 218 x 123 x 200 mm). 3DJake shows the M7 sold out[1][5][6][2][7] | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[3][4] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm (Anycubic quotes 6.5 L)[1][2] | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[3][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[1][2] | 477 x 467 x 489 mm machine dimensions (QIDI)[3][8] |
| Net weight (kg) | 12 kg[1][2] | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[3][8] |
| Frame construction & material | Not documented | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[3][8] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[3][8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear rails, straight-lift peel[1][2] | CoreXY[8] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[8] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear rails, Anycubic quotes 10 um Z precision[1] | Independent dual Z lead-screw motors[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[3][8] |
| Max acceleration (claimed, mm/s²) | Not documented | <=20,000 mm/s2 (manufacturer claim)[3][8] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive extruder with hardened steel gears[3][8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[3][8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed. No firmware max_temp verified for this model[3][8] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed. No firmware limit verified for this model[3][8] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved build plate[1] | Double-sided textured PEI plate on an aluminium substrate bed[3][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free — no user levelling step[1][2] | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[8] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[8] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[8] |
| Total rated power draw | 135 W power supply[1] | 350 W plus 300 W for chamber heating (rated)[3][8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touch control screen (control panel — not the masking LCD, see W1)[1] | 4.3-inch touchscreen, 272 x 480[3][8] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[2] | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[3][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera, up to 1080p, timelapse supported. Framerate not published[3][8] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection[2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Ships fully assembled[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed as a feature; mechanism not published[8] |
| Materials Support | ||
| Officially supported filament list | High-speed, water-washable, standard, ABS-like and plant-based resins (Anycubic's own list)[1] | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[9] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um (manufacturer specification)[1][2] | Not documented |
| Light source | COB light source with a Fresnel lens and a light-uniformity algorithm[1][2] | Not documented |
| Light uniformity & intensity | Uniformity >=90% and intensity 4500 +/-10% uW/cm2 (both manufacturer claims, no independent measurement). Anycubic also states light intensity is uniform within an angle of <=3 degrees[1][2] | Not documented |
| Vertical print speedmm/h | 150 mm/h with high-speed resin at 0.1 mm layer height; 90 mm/h with standard resin at the same layer height. Anycubic's headline maximum is 90 mm/h for standard resin, so the 150 figure is resin-dependent (manufacturer claims)[1][2] | Not documented |
| Layer height range | 0.01-0.15 mm[1] | Not documented |
| Release film | Improved ACF film. No rated life published for this model (the M7 Pro's ACF film is rated ~45,000 uses)[1][2][7] | Not documented |
| Resin vat & feeding | Resin vat capacity up to 1 L, with resin level monitoring. No auto-refill on this model[1][2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 technical data table 3djake.com · 2026-08 · vendor
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor