3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 Pro vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 Pro comparisonsMore Sovol Zero comparisons
| Property | ANYCUBIC Photon Mono M7 ProRESIN | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Sovol |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro[1][2] | Sovol Zero 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[1] | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[3][4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[1][6][2] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[3][5][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm[1][2] | 152.4 x 152.4 x 152.5 mm advertised[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[2] | 345 x 420 x 475 mm[3] |
| Net weight (kg) | 12.8 kg[2] | Not documented |
| Frame construction & material | Not documented | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Fully enclosed[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel[1] | CoreXY[5] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails on all axes[5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[3][5] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[3][5] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=50 mm3/s (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Planetary-gear direct-drive extruder[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[3][5] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed; Sovol states the bed is AC-heated[3][5] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided PEI steel plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free[1][2] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[3][5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted; type and location not published[3][5] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[3][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[3][5] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[3][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera for monitoring; resolution not published[3][5] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Arrives preassembled[5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[3][5] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[1][2] | Not documented |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[1][2] | Not documented |
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens[1][2] | Not documented |
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[1][2] | Not documented |
| Vertical print speedmm/h | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[1][2] | Not documented |
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[2][1] | Not documented |
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[1][2] | Not documented |
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor