3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M7 Pro vs Creality K2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M7 Pro comparisonsMore Creality K2 comparisons
| Property | ANYCUBIC Photon Mono M7 ProRESIN | Creality K2COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Creality |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M7 Pro[1][2] | Creality K2[3] |
| Street price (USD; dated snapshot per entry) | $562.00 on store.anycubic.com against a $769.00 compare-at price, in stock, checked Aug 2026. A Wash & Cure 3 Plus bundle is $745.00; resin quantity and plug type are separate options that change the total[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares the 223 x 126 x 230 mm envelope and 10.1-inch 14K LCD with the plain Photon Mono M7 but is a different machine: LighTurbo 3.0 (COB + Fresnel), a dynamically temperature-controlled vat with a peristaltic pump and heater, auto resin refill and withdrawal, and 170 mm/h against the M7's 150. Pixel counts are also published inconsistently — Anycubic's store says 13,320 x 5,120 while 3DJake's table says 13,312 x 5,120. Bundle SKUs at the same store are not printer-only prices[1][4][2] | Smallest of three K2 machines that share a product page. K2: 260 mm cube, no chamber heating, 100 C bed, 300 C nozzle, 8 GB storage, one air filter, one auxiliary cooling fan, 720p camera, no RFID reader, no Ethernet. K2 Pro: 300 mm cube, 60 C chamber, 110 C bed, RFID, Ethernet, 32 GB. K2 Plus: 350 mm cube, 350 C nozzle, 120 C bed, 30000 mm/s2, dual air filters, auto belt tensioning, 1080p camera, dual-band Wi-Fi. A K2 SE also exists as a separate model[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 230 mm[1][2] | 260 x 260 x 260 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 312 x 315 x 520 mm[2] | 404 x 436 x 545 mm[3] |
| Net weight (kg) | 12.8 kg[2] | 18.3 kg[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Enclosed, but with no chamber temperature control - Creality's table gives a max chamber temperature for the K2 Pro and K2 Plus and a dash for the K2. One air filter fitted[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis, straight-lift peel[1] | CoreXY - Creality groups the K2 series with its CoreXY flagships and quotes 600 mm/s with step-servo motors on the X and Y axes[3] |
| Belts (type, width, e.g. Gates?) | Not documented | Manual belt tensioning (the K2 Plus is auto-adjusted)[3] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | Step-servo motors on the X and Y axes and the extruder (the K2 Plus adds them on Z)[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 600 mm/s max printing speed (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | Not documented | 20000 mm/s2 max acceleration (manufacturer claim)[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 C claimed max nozzle temperature[3] |
| Heater cartridge power (W) | Not documented | 70 W rated hotend power[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C max heatbed temperature - the lowest in the K2 family[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free[1][2] | Smart auto levelling fitted; unlike the K2 Pro and Plus there is no nozzle AI camera, so there is no automatic flow-rate calibration[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | One auxiliary cooling fan and one air filter[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Creality OS, a Klipper derivative. Creality publishes the K2 firmware source as CrealityOfficial/K2_Series_Klipper on GitHub under GPL-3.0, last pushed March 2026[5][6][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4-inch touchscreen[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touch UI with alarm sounds; no built-in RFID reader[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi 2.4 GHz, USB drive and a Creality 485 port; no Ethernet. 8 GB eMMC storage[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | One chamber camera, 720p at 30 fps[3] |
| Camera features: live monitor, timelapse, AI failure detection (spaghetti detection) — how real is it? | Failed-print detection, film-lifespan tracking and resin-residue detection[1][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, PET, ABS, PLA-CF - a shorter list than the K2 Pro and Plus, which add ASA, PA-CF and PPA-CF[3] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Not verified directly. Creality publishes the K2-series firmware as CrealityOfficial/K2_Series_Klipper (GPL-3.0); upstream Klipper ships the verify_heater thermal-runaway check, but whether the stock configuration enables it was not checked here[5][6] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year on Anycubic 3D printers[1] | Creality's US store states "Up to 12-Month Warranty", a 14-day return and refund window and "Lifetime Customer Support" on its printer product pages. The "up to" wording means the term is not uniform across parts[7] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Tolerance +/-0.01 to 0.05 mm — a manufacturer specification, not an independent measurement[1][2] | Not documented |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 14K, XY pixel pitch 16.8 x 24.8 um. Pixel count published as 13,320 x 5,120 by Anycubic and 13,312 x 5,120 by 3DJake[1][2] | Not documented |
| Light source | LighTurbo 3.0 — COB light source with a Fresnel lens[1][2] | Not documented |
| Light uniformity & intensity | On-screen uniformity >90% (manufacturer claim; Anycubic writes >=90%, 3DJake >90%). No intensity figure published for this model and no independent measurement[1][2] | Not documented |
| Vertical print speedmm/h | 170 mm/h with high-speed resin at 0.1 mm layer height; 130 mm/h with standard resin at the same layer height (manufacturer claims)[1][2] | Not documented |
| Release film | ACF film, rated at approximately 45,000 uses. The machine tracks film lifespan itself[2][1] | Not documented |
| Resin vat & feeding | Resin vat with dynamic temperature control driven by a peristaltic pump and heater, plus an automatic resin management system with auto-fill and withdrawal and resin level detection. Anycubic does not publish the vat capacity or the heater setpoint[1][2] | Not documented |
| Fume extraction | None fitted as standard. Anycubic offers the separately sold AirPure air purifier, which it says filters up to 99% of VOCs[2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro technical data table 3djake.com · 2026-08 · vendor
- Creality K2 series product page, including the Compare K2 Series table (K2 / K2 Pro / K2 Plus) creality.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- GitHub API - CrealityOfficial/K2_Series_Klipper repository metadata (GPL-3.0, last push Mar 2026) api.github.com · 2026-08 · doc
- GitHub - CrealityOfficial organisation repositories (per-model firmware sources) github.com · 2026-08 · doc
- Creality US store - K1 3D Printer product page (live price, warranty and returns banner) store.creality.com · 2026-08 · vendor