3D Printing InfoPrinter comparison
Anycubic Photon Mono M7 Max vs FlashForge Guider 3 Ultra
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Photon Mono M7 Max comparisonsMore FlashForge Guider 3 Ultra comparisons
| Property | Anycubic Photon Mono M7 MaxRESIN | FlashForge Guider 3 UltraINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Photon Mono M7 Max[1] | Flashforge Guider 3 Ultra; the FlashForge spec table gives the machine name as "Guider 3 Ultra"[2] |
| Street price (USD; dated snapshot per entry) | $749 advertised base sale/from price; $899 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[1] | $2,399.00 against a $3,499.00 regular price on flashforge.com, but the listing checked is the refurbished SKU and is marked Sold out (Aug 2026)[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not documented | Top of the Guider 3 series. Build size depends on which head is used: 330 x 330 x 600 mm with one extruder, 300 x 330 x 600 mm with both. Siblings Guider 3 (300x250x340) and Guider 3 Plus (350x350x600) are both single-extruder. A refurbished SKU exists alongside the new machine, so check which one a price refers to[2][3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 298 × 164 × 300 mm (X × Y × Z), advertised 14.7 L; usable volume not independently measured.[1] | 330 x 330 x 600 mm with a single extruder; 300 x 330 x 600 mm when both extruders are in use[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 635 x 550 x 1070 mm; packaging 775 x 690 x 1235 mm[2] |
| Net weight (kg) | 24 kg (manufacturer specification)[1] | 70 kg net, 86 kg gross[2] |
| Frame construction & material | Not documented | Enclosed professional chassis; FlashForge describes a lightweight, stable structure for high-speed operation[2] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Closed design with an air filter fitted[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY with two extruders, per a third-party buyer's guide. FlashForge's own spec table does not state the kinematics[5][2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear Z rails; manufacturer states 10 µm precision.[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 10-500 mm/s printing speed, 500 mm/s maximum travel speed (manufacturer figures)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 maximum (manufacturer claim)[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Active vibration compensation, which FlashForge says was enhanced for this model. Implementation not named[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Two extruders[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 350 °C maximum extruder temperature (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 120 °C bed setting supported (manufacturer figure)[2] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium build plate[1] | Replaceable flexible steel-plate platform, magnetic. No glass bed[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Four-point manual leveling[1] | Full-auto one-click levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out reminder[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air filter fitted; filter media not specified in the FlashForge table[2] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | 180 W power supply (manufacturer specification; not measured consumption)[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-240 V, 50/60 Hz[2] |
| Total rated power draw | Not documented | 850 W maximum[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named; slicers are Orca-Flashforge and FlashPrint 5, with OrcaSlicer listed as compatible[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[1] | 7-inch touch LCD[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi; store still labels LAN as scheduled, so availability is unverified.[1] | USB, Ethernet, Wi-Fi, plus cloud[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Remote camera monitoring and time-lapse video supported; resolution not published[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published. Automatic shutdown also supported[2] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, HIPS, ASA, PETG, CoPA, PLA-CF, PETG-CF, PAHT-CF, PAHT-GF, PET-CF, PET-GF, PA12-CF, PA-CF, PA-GF, NexPA-CF25[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE, FCC, RoHS (as printed in FlashForge's own spec table)[2] |
| Resin & MSLA | ||
| Masking LCD | 13.6-inch monochrome 7K masking LCD, 46 × 46 µm XY pixel pitch (manufacturer specification)[1] | Not documented |
| Light source | COB + Fresnel lens + light-uniformity algorithm[1] | Not documented |
| Light uniformity & intensity | 4500 ±10% µW/cm² (manufacturer specification)[1] | Not documented |
| Vertical print speedmm/h | Standard resin: ≤31 mm/h at 0.05 mm layers; ≤63 mm/h at 0.1 mm. High-speed resin: ≤86 mm/h at 0.1 mm. Manufacturer table also labels ≤63 mm/h as maximum; headline figures differ. No independent measurement added.[1] | Not documented |
| Layer height range | 0.01–0.15 mm layer height[1] | Not documented |
| Release film | Improved ACF film (manufacturer description)[1] | Not documented |
| Resin vat & feeding | ≤1.3 L vat, dynamic resin temperature control and auto-fill/recycling support (manufacturer specifications).[1] | Not documented |
| Fume extraction | Optional air purifier; filtration efficacy not independently verified.[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M7 Max official store: base price and specifications Anycubic · 2026-10-17 · vendor
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review