3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M5s vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M5s comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | ANYCUBIC Photon Mono M5sRESIN | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | LulzBot |
| Class | RESIN | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M5s[1][2] | LulzBot TAZ Pro Long Bed 3D Printer[3] |
| Street price (USD; dated snapshot per entry) | $609.00 on store.anycubic.com, with the compare-at price also $609.00, but marked Sold out, checked Aug 2026. 3DJake also shows it sold out and delisted[1][2] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Older and smaller than the M7 family: 12K LCD (11520 x 5120) vs 14K, 218 x 123 x 200 mm vs 223 x 126 x 230, an LED-matrix light source rather than COB + Fresnel, and 105 vs 150-170 mm/h on high-speed resin. Note Anycubic's spec table lists the machine dimensions in H x W x D order[1][2][4][5] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[3][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 218 x 123 x 200 mm (Anycubic quotes 5.4 L; the table writes it as 200 x 218 x 123 mm in H x W x D order)[1][2] | 282 x 582 x 285 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 460 x 270 x 290 mm (H x W x D per Anycubic; 3DJake writes 270 x 290 x 460 mm)[1][2] | Not documented |
| Net weight (kg) | 8.9 kg[1][2] | Not documented |
| Frame construction & material | Not documented | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on double linear guides, straight-lift peel[1][2] | Cartesian bedslinger[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double linear guides, 10 um precision[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[3] |
| Speed & Acceleration | ||
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Asteroid 285 tool head[3] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 °C maximum, firmware-limited[3] |
| Stock nozzle size & sizes included in box | Not documented | 1.2 mm GammaMaster steel[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[3] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium-alloy build platform[1][2] | Blue spring-steel magnetic flex bed system[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free design[1][2] | BLTouch, 32-point automatic mesh calibration[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with runout and stripping detection[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[3] |
| Total rated power draw | 100 W rated[1][2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Marlin[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch TFT touchscreen (control panel — not the masking LCD, see W1)[1][2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB Type-A 2.0 and Wi-Fi[1][2] | USB serial; 16 GB flash drive included for standalone printing[3] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published on this page[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[3] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 12K, 11,520 x 5,120 px, 480:1 contrast, XY pixel pitch 19 x 24 um (manufacturer specification)[1][2] | Not documented |
| Light source | LED matrix UV light source. Anycubic does not publish wavelength or collimating optics for this model[1][2] | Not documented |
| Vertical print speedmm/h | 105 mm/h with high-speed resin, 70 mm/h with standard resin (manufacturer claims; Anycubic labels these average printing speeds and does not state the layer height assumed)[1][2] | Not documented |
| LCD life & replaceability | Swappable scratchproof screen protector film over the masking LCD. Anycubic publishes no rated screen life in hours[2] | Not documented |
| Resin vat & feeding | Unibody resin vat with scale lines. Capacity not published; no auto-refill and no level sensing stated for this model[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s technical data table 3djake.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor