3D Printing InfoPrinter comparison
ANYCUBIC Photon Mono M5s vs ELEGOO OrangeStorm Giga
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore ANYCUBIC Photon Mono M5s comparisonsMore ELEGOO OrangeStorm Giga comparisons
| Property | ANYCUBIC Photon Mono M5sRESIN | ELEGOO OrangeStorm GigaINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | RESIN | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | ANYCUBIC Photon Mono M5s[1][2] | ELEGOO OrangeStorm Giga[3] |
| Release date (announcement and actual shipping) | Not documented | Listed on the ELEGOO US store from 17 October 2024 (Shopify publish date)[4] |
| Street price (USD; dated snapshot per entry) | $609.00 on store.anycubic.com, with the compare-at price also $609.00, but marked Sold out, checked Aug 2026. 3DJake also shows it sold out and delisted[1][2] | $2,499.00 on us.elegoo.com, Aug 2026, against a compare-at price of $3,125.00[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Older and smaller than the M7 family: 12K LCD (11520 x 5120) vs 14K, 218 x 123 x 200 mm vs 223 x 126 x 230, an LED-matrix light source rather than COB + Fresnel, and 105 vs 150-170 mm/h on high-speed resin. Note Anycubic's spec table lists the machine dimensions in H x W x D order[1][2][5][6] | Sold bare and in bundles; dual-printhead and quad-printhead upgrade kits are separate products, so a Giga's nozzle count depends on which kit was bought. The four printheads sit on the same X axis and print four copies of the same model in parallel (or the same model in four colours) - this is not an IDEX or a toolchanger[3][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 218 x 123 x 200 mm (Anycubic quotes 5.4 L; the table writes it as 200 x 218 x 123 mm in H x W x D order)[1][2] | 800 x 800 x 1000 mm; the platform is 820 x 820 mm made up of four independent 410 x 410 mm PEI plates[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 460 x 270 x 290 mm (H x W x D per Anycubic; 3DJake writes 270 x 290 x 460 mm)[1][2] | 1224 x 1164 x 1425 mm; ELEGOO's maximum size for machine activity is 1224 x 1520 x 1570 mm. This is a floor-standing machine, not a desktop one[3] |
| Net weight (kg) | 8.9 kg[1][2] | 104 kg net, 145 kg gross, and it ships in multiple crates (bottom + XY axis components, then two Z-axis components)[3] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame; the X and Y axes run on linear guides and the machine sits on carbon steel round bases with rubber anti-slip pads[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on double linear guides, straight-lift peel[1][2] | Cartesian gantry with a fixed bed - the printhead moves in X and Y on linear guides and the gantry moves in Z, so nothing about the bed moves during a print[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear guide on the X axis[3] |
| Y-axis guide type | Not documented | Linear guide on the Y axis[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double linear guides, 10 um precision[1] | Four lead screws with four linear guide rods[8] |
| Belts (type, width, e.g. Gates?) | Not documented | X/Y belts with knob-adjustable tensioners[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)"; no driver part number published[8] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 30-300 mm/s, with 150 mm/s given by ELEGOO as the recommended speed - far below the 500-600 mm/s claimed for desktop machines, which is the honest consequence of moving a gantry this size[3][8] |
| Recommended/typical print speed | Not documented | 150 mm/s recommended printing speed (manufacturer figure)[8] |
| Max acceleration (claimed, mm/s²) | Not documented | 5000 mm/s2 maximum acceleration, which is also the default - four times lower than the Centauri machines[8] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Dual-gear direct extruder with 2 fans[8] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle - and note the standard diameter here is 0.6 mm, not the 0.4 mm used across the rest of the ELEGOO range[8] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 C claimed max nozzle temperature[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 C max heated bed temperature at 25 C ambient, across four independent 410 x 410 mm PEI magnetic high-temperature platforms[3] |
| Bed surface (material, texture, coating), single/double-sided | Laser-engraved aluminium-alloy build platform[1][2] | Four independent 410 x 410 mm PEI magnetic platforms rather than one large plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Levelling-free design[1][2] | Manual levelling combined with 100-point auto-levelling (the desktop ELEGOO machines use a 121-point mesh)[8][9] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection and power-loss resume printing[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Up to three additional printheads can be added on the X axis for four-nozzle simultaneous printing - four copies of one model at once, or the same model in four colours[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Klipper High-Speed Quiet Motherboard" is all ELEGOO publishes[8] |
| Total rated power draw | 100 W rated[1][2] | 1530 W with a single head, plus 100 W per additional head, to a stated maximum of 1830 W with four nozzles; 100-120 VAC / 220-240 VAC, 50/60 Hz[3][8] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch TFT touchscreen (control panel — not the masking LCD, see W1)[1][2] | 10.1-inch colour capacitive touch screen - by far the largest in the ELEGOO range[8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Colour capacitive touch UI; ElegooSlicer recommended, Orca and Cura supported[8] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB Type-A 2.0 and Wi-Fi[1][2] | Wi-Fi, USB and LAN file transfer[3] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published on this page[1] | The product page lists PLA, PETG and TPU; ELEGOO's compare page adds Nylon to the same machine. Either way it is a much shorter list than the Neptune bed-slingers[3][8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[10] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch monochrome masking LCD at 12K, 11,520 x 5,120 px, 480:1 contrast, XY pixel pitch 19 x 24 um (manufacturer specification)[1][2] | Not documented |
| Light source | LED matrix UV light source. Anycubic does not publish wavelength or collimating optics for this model[1][2] | Not documented |
| Vertical print speedmm/h | 105 mm/h with high-speed resin, 70 mm/h with standard resin (manufacturer claims; Anycubic labels these average printing speeds and does not state the layer height assumed)[1][2] | Not documented |
| LCD life & replaceability | Swappable scratchproof screen protector film over the masking LCD. Anycubic publishes no rated screen life in hours[2] | Not documented |
| Resin vat & feeding | Unibody resin vat with scale lines. Capacity not published; no auto-refill and no level sensing stated for this model[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Photon Mono M5s product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M5s technical data table 3djake.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO OrangeStorm Giga Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Photon Mono M7 product page store.anycubic.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Pro product page store.anycubic.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor