3D Printing InfoPrinter comparison
Anycubic Kobra X vs Stratasys F120
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra X comparisonsMore Stratasys F120 comparisons
| Property | Anycubic Kobra XBEDSLINGER | Stratasys F120INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Stratasys |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra X (store variant title "Kobra X (4 Colors)")[1] | Stratasys F120, part of the Stratasys F123 Series[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 25 December 2025 (Shopify publish date)[3] | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[2] |
| Street price (USD; dated snapshot per entry) | $299.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $399.00 ($344.00 for the EU plug variant). The collection page headline reads "Kobra X - Price from $289"[3][4] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 260 mm cube and the same machine dimensions as the Kobra 4 (455.4 x 445.3 x 461.3 mm) - the difference is that the Kobra X has native 4-colour printing built in, expandable to 19 colours, where the Kobra 4 needs an ACE 2 Pro for any multicolour at all. The Kobra X also takes a wider filament list (adds PVA, PLA-CF, PETG-CF, ASA) but still needs an ACE 2 Pro for active drying[1][5] | The F120 is the odd one out in the series: smaller cabinet (889 x 870 x 721 mm, 124 kg vs 1,626 x 864 x 711 mm, 227 kg), two external material coil boxes rather than internal spool bays, only two model materials, and no 0.127 mm layer option. Same build size as the F170 but not the same machine[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 254 x 254 x 254 mm (10 x 10 x 10 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the ACE 2 Pro, if added, is a separate 368 x 291.5 x 236.5 mm unit[1] | 889 x 870 x 721 mm (35 x 35 x 29 in)[2] |
| Net weight (kg) | About 9.5 kg for the printer (Anycubic's own figure is approximate); packaged 13.2 kg bare or 18 kg as the Combo[1] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[2] |
| Frame construction & material | Not documented | Fully enclosed office/classroom-grade cabinet, factory assembled[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed build chamber[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic does not state a construction type for the Kobra X, but its dimensions, price and feature set match the gantry/bed-slinger Kobra 4 rather than the CoreXY S1 series[1][5] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | Not documented |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard, expandable to 0.25, 0.6 and 0.8 mm[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset and area levelling[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Native 4-colour printing built in, expandable to 19 colours; active drying still needs a separate ACE 2 Pro[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[2] |
| Connectivity, UI & Camera | ||
| On-device UI capabilities (model preview, per-object controls, etc.) | Control from the printer, the slicing software, the Anycubic app and USB (print only); AI spaghetti detection and object skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA, PLA-CF, PETG-CF, ASA[1] | ABS-M30 and ASA, with SR-30 support material. Notably the F120 does NOT get PLA, FDM TPU 92A or ABS-CF10, and cannot use the 0.127 mm layer height[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less - a manufacturer figure with no mode, distance or method stated[1] | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[6] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Anycubic Kobra X Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic store 3D printers collection (current line-up and headline prices, Aug 2026) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor