3D Printing InfoPrinter comparison
Anycubic Kobra S1 vs FlashForge Creator 5 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 comparisonsMore FlashForge Creator 5 Pro comparisons
| Property | Anycubic Kobra S1COREXY | FlashForge Creator 5 ProTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1[1] | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 2 January 2025 (Shopify publish date)[4] | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[5][6] |
| Launch MSRP (USD) | Not documented | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[5][6] |
| Street price (USD; dated snapshot per entry) | $349.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $549.00 ($401.00 for the EU plug variant)[4] | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The CoreXY line, not to be confused with the gantry/bed-slinger Kobra 3, Kobra 4 and Kobra X. Within the S line the Kobra S1 Max is a much bigger machine: 350 mm cube against 250, a 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 does not have at all, and 25.7 kg against 9.37 kg. Multicolour is sold separately on both (ACE Pro / ACE 2 Pro)[1][7] | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[2][5][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 250 x 250 mm[1] | 256 x 256 x 256 mm[5][6][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 400 x 410 x 490 mm[1] | Not documented |
| Net weight (kg) | 9.37 kg net, 20.2 kg packaged[1] | Not documented |
| Frame construction & material | Not documented | Rigid frame with a fully sealed enclosure; no dimensions or weight published[2][6] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed - Anycubic's own wording is "Fully Enclosed CoreXY Construction". There is no active chamber heating on the S1 (that is the S1 Max's addition)[1][7] | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[2][5][6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[2][5][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | CoreXY with four independent FlashSwap toolheads[5][6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 600 mm/s maximum (manufacturer claim)[2][5][6] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended (manufacturer claims)[1] | 30,000 mm/s2 maximum (manufacturer claim)[5][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend; 0.4 mm standard nozzle expandable to 0.25, 0.6 and 0.8 mm[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 320 C maximum nozzle temperature[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[5][6] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate - the highest bed ceiling of any Anycubic machine in this file except the S1 Max[1] | 120 °C maximum (manufacturer claim)[6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset, plus area levelling[1] | Fully automatic calibration and levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, filament entanglement detection and power-loss resume[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Multicolour is sold separately - the ACE Pro / ACE 2 Pro units are not included with the bare S1[1] | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[2][5] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[2][5][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS, with pressure advance and flow calibration supported[1] | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, the Anycubic app and USB (print only); AI spaghetti detection and object-skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app, USB (print only)[1] | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, but only 480p - lower than the 720p units on the S1 Max, Kobra 4 and Kobra X[1][7][9] | 1080p camera at 30 fps[5][6] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, ABS, ASA[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 46 dB or less in standard mode and 44 dB or less in quiet mode - manufacturer figures with no distance or method stated, so not comparable with an independently measured reading[1] | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Anycubic Kobra S1 Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor