3D Printing InfoPrinter comparison
Anycubic Kobra S1 Max vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 Max comparisonsMore Snapmaker U1 comparisons
| Property | Anycubic Kobra S1 MaxCOREXY | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Snapmaker |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1 Max[1] | Snapmaker U1 3D Printer[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 16 January 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant)[3] | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The large enclosed Anycubic. Against the Kobra S1: 350 mm cube against 250 (Anycubic claims 174% more volume), 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 lacks entirely, a titanium-alloy throat tube and hardened-steel extruder gears, an activated carbon filter, 720p camera against 480p, and 25.7 kg against 9.37 kg. Its engineering-filament list is correspondingly longer[1][4] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 270 x 270 x 270 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 502.7 x 483 x 584 mm[1] | 584 x 499 x 730 mm[2] |
| Net weight (kg) | 25.7 kg net, 31 kg packaged[1] | 18.2 kg[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed CoreXY with 65 C active chamber heating, dual external-circulation cooling fans and an activated carbon filter, plus a temperature and moisture display[1] | Open as sold; a top cover is an optional accessory that raises the supported material range[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 C active chamber heating (manufacturer figure, actively heated rather than passive)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 500 mm/s maximum toolhead speed (manufacturer claim)[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 20,000 mm/s2 maximum (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s maximum hotend flow (manufacturer claim)[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[2] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with hardened-steel extruder gears, which Anycubic rates at six times the life of brass on carbon-fibre filament[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend with a titanium-alloy throat tube; 0.4 mm and 0.6 mm nozzles supplied, 0.25 and 0.8 mm optional; hardened steel[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C maximum nozzle temperature[1] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Stainless steel as standard; hardened steel needed for fibre-filled grades[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate[1] | 100 °C maximum (manufacturer claim)[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel sheet with a PEI surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling[1] | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament run-out detection, plus air-printing detection and RFID filament recognition[2] |
| Multi-material/multi-color capability or official upgrade path | Up to 16-colour printing with ACE 2 Pro units, sold separately[1] | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Main plus auxiliary part-cooling fans[2] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Activated carbon filter for odour removal; dual external-circulation cooling fans[1] | Not documented |
| Electronics & Power | ||
| Total rated power draw | Not documented | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 3.5-inch, 320 x 480 touchscreen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, Anycubic app and U-disk; AI spaghetti detection using an in-house algorithm and the 720p camera[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and U-disk[1] | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera, 720p, used for real-time AI anomaly detection[1] | 2 MP built-in chamber camera for live view[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships 95% pre-assembled; Anycubic claims unbox to print in 10 minutes[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | Consumer grades: PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF, PETG-CF, PVA. Engineering grades: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF[1] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode, as low as 45 dB in quiet mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- Anycubic Kobra S1 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor