3D Printing InfoPrinter comparison
Anycubic Kobra S1 Max vs FlashForge Creator 5
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 Max comparisonsMore FlashForge Creator 5 comparisons
| Property | Anycubic Kobra S1 MaxCOREXY | FlashForge Creator 5TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | COREXY | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1 Max[1] | Flashforge Creator 5, sold as "Creator 5 4-Toolheads Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 16 January 2026 (Shopify publish date)[4] | Announced with a $10 deposit programme; shipping to deposit backers by 19 May 2026. One secondary source puts general release in early May 2026[5][6] |
| Launch MSRP (USD) | Not documented | $649 early-bird (deposit price, open until 20 June 2026); $799 standard MSRP[5][6] |
| Street price (USD; dated snapshot per entry) | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant)[4] | $799.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The large enclosed Anycubic. Against the Kobra S1: 350 mm cube against 250 (Anycubic claims 174% more volume), 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 lacks entirely, a titanium-alloy throat tube and hardened-steel extruder gears, an activated carbon filter, 720p camera against 480p, and 25.7 kg against 9.37 kg. Its engineering-filament list is correspondingly longer[1][7] | Paired with the Creator 5 Pro at $949, which adds a sealed enclosure, 65 °C active chamber heating and HEPA13 + carbon filtration. Motion system, 256 mm build volume, four toolheads, 600 mm/s and 30,000 mm/s2 are the same on both, so enclosure and chamber are the only reliable discriminators[2][8][5][6][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 256 x 256 x 256 mm[5][6][9] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 502.7 x 483 x 584 mm[1] | Not documented |
| Net weight (kg) | 25.7 kg net, 31 kg packaged[1] | Not documented |
| Frame construction & material | Not documented | CoreXY frame; FlashForge does not publish a frame-material breakdown and no dimensions or weight have been published for this model[5][6] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed CoreXY with 65 C active chamber heating, dual external-circulation cooling fans and an activated carbon filter, plus a temperature and moisture display[1] | Open frame. No enclosure, no chamber heating and no filtration[5][6][9] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 C active chamber heating (manufacturer figure, actively heated rather than passive)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | CoreXY with four independent toolheads on a FlashSwap changer. FlashForge claims a physical head swap in about 7 seconds[5][6][9] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 600 mm/s maximum, reported by both secondary sources as a travel-speed figure (manufacturer claim)[5][6] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 30,000 mm/s2 maximum (manufacturer claim)[5][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with hardened-steel extruder gears, which Anycubic rates at six times the life of brass on carbon-fibre filament[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend with a titanium-alloy throat tube; 0.4 mm and 0.6 mm nozzles supplied, 0.25 and 0.8 mm optional; hardened steel[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C maximum nozzle temperature[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[5][6] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate[1] | 120 °C maximum (manufacturer claim)[5][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling[1] | Fully automatic calibration and levelling; FlashForge does not name the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Up to 16-colour printing with ACE 2 Pro units, sold separately[1] | Four independent toolheads swapped physically rather than shared through one nozzle, which FlashForge markets as zero purge waste and up to 500% faster multi-colour printing[2][5] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Activated carbon filter for odour removal; dual external-circulation cooling fans[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, Anycubic app and U-disk; AI spaghetti detection using an in-house algorithm and the 720p camera[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and U-disk[1] | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera, 720p, used for real-time AI anomaly detection[1] | 1080p camera at 30 fps. A camera module is also sold separately at $29.90, so verify whether a given SKU ships with it[5][6][3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships 95% pre-assembled; Anycubic claims unbox to print in 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Consumer grades: PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF, PETG-CF, PVA. Engineering grades: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode, as low as 45 dB in quiet mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Anycubic Kobra S1 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor