3D Printing InfoPrinter comparison
Anycubic Kobra S1 Max vs FlashForge Creator 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 Max comparisonsMore FlashForge Creator 4 comparisons
| Property | Anycubic Kobra S1 MaxCOREXY | FlashForge Creator 4IDEX |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | COREXY | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1 Max[1] | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 16 January 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant)[3] | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The large enclosed Anycubic. Against the Kobra S1: 350 mm cube against 250 (Anycubic claims 174% more volume), 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 lacks entirely, a titanium-alloy throat tube and hardened-steel extruder gears, an activated carbon filter, 720p camera against 480p, and 25.7 kg against 9.37 kg. Its engineering-filament list is correspondingly longer[1][4] | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 400 x 350 x 500 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 502.7 x 483 x 584 mm[1] | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[2] |
| Net weight (kg) | 25.7 kg net, 31 kg packaged[1] | 90 kg net[2] |
| Frame construction & material | Not documented | Fully enclosed professional chassis on a stand[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed CoreXY with 65 C active chamber heating, dual external-circulation cooling fans and an activated carbon filter, plus a temperature and moisture display[1] | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 C active chamber heating (manufacturer figure, actively heated rather than passive)[1] | Up to 65 °C, actively controlled (manufacturer claim)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | IDEX — two independently driven extruders on the same gantry[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with hardened-steel extruder gears, which Anycubic rates at six times the life of brass on carbon-fibre filament[1] | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend with a titanium-alloy throat tube; 0.4 mm and 0.6 mm nozzles supplied, 0.25 and 0.8 mm optional; hardened steel[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C maximum nozzle temperature[1] | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[2] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate[1] | 130 °C maximum (manufacturer claim)[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling[1] | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Two spool bays, 1 kg and 2 kg capacity[2] |
| Multi-material/multi-color capability or official upgrade path | Up to 16-colour printing with ACE 2 Pro units, sold separately[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Activated carbon filter for odour removal; dual external-circulation cooling fans[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[2] |
| Total rated power draw | Not documented | 2320 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Not named; the supported slicer is FlashPrint[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 7-inch touchscreen, 1024 x 600[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, Anycubic app and U-disk; AI spaghetti detection using an in-house algorithm and the 720p camera[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and U-disk[1] | USB flash drive, Ethernet, Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera, 720p, used for real-time AI anomaly detection[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships 95% pre-assembled; Anycubic claims unbox to print in 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Consumer grades: PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF, PETG-CF, PVA. Engineering grades: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF[1] | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode, as low as 45 dB in quiet mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[5] | 12 months on the printer, 3 months on extruder parts[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Anycubic Kobra S1 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor