3D Printing InfoPrinter comparison
Anycubic Kobra S1 Max vs ELEGOO Neptune 4 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra S1 Max comparisonsMore ELEGOO Neptune 4 Plus comparisons
| Property | Anycubic Kobra S1 MaxCOREXY | ELEGOO Neptune 4 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra S1 Max[1] | ELEGOO Neptune 4 Plus[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 16 January 2026 (Shopify publish date)[3] | Listed on the ELEGOO US store from 20 September 2023 (Shopify publish date), the same date as the Neptune 4 Max[4][5] |
| Street price (USD; dated snapshot per entry) | $699.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $899.00 ($804.00 for the EU plug variant)[3] | $309.00 on us.elegoo.com, Aug 2026, against a compare-at price of $425.00. Only a Ribbon-Cable printhead variant is listed for the Plus, unlike the Neptune 4 and 4 Max which also offer a Type-C version[4][6][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The large enclosed Anycubic. Against the Kobra S1: 350 mm cube against 250 (Anycubic claims 174% more volume), 350 C hardened-steel nozzle against 320 C, 65 C active chamber heating that the S1 lacks entirely, a titanium-alloy throat tube and hardened-steel extruder gears, an activated carbon filter, 720p camera against 480p, and 25.7 kg against 9.37 kg. Its engineering-filament list is correspondingly longer[1][7] | Middle model of the Neptune 4 family. Against the base Neptune 4: bigger (320 x 320 x 385 mm), but a lower bed ceiling (100 C rather than 110 C) and much lower acceleration (12000 rather than 20000 mm/s2). Against the Max: smaller and lighter (14.4 kg against 18.1 kg) but with a higher bed ceiling (100 C against 85 C) and higher acceleration (12000 against 8000). Its Z drive is 2 lead screws with 2 tie rods, where the Centauri machines use 3 lead screws[2][8][9][10] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 350 mm[1] | 320 x 320 x 385 mm; printing platform 330 x 330 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 502.7 x 483 x 584 mm[1] | 533 x 517 x 638 mm; ELEGOO also publishes a maximum size for machine activity of 578 x 750 x 860 mm including rack and tray, so allow 750 mm of depth[2] |
| Net weight (kg) | 25.7 kg net, 31 kg packaged[1] | 14.4 kg net, 16.65 kg gross[2] |
| Frame construction & material | Not documented | CNC-machined aluminium extrusion frame (Neptune 4 family)[8] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed CoreXY with 65 C active chamber heating, dual external-circulation cooling fans and an activated carbon filter, plus a temperature and moisture display[1] | Open frame, no enclosure[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 C active chamber heating (manufacturer figure, actively heated rather than passive)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY (stated outright in Anycubic's specification table)[1] | Cartesian i3 bed-slinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Two lead screws with two tie rods[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)" is all ELEGOO publishes; the driver part number is not given on the product page[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | 30-500 mm/s printing speed, with 250 mm/s given by ELEGOO as the recommended figure - the 500 mm/s number is a ceiling, not a working speed[2] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 12000 mm/s2 maximum acceleration; default acceleration 5000 mm/s2[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with hardened-steel extruder gears, which Anycubic rates at six times the life of brass on carbon-fibre filament[1] | Dual-gear direct extruder with 2 fans (the Centauri machines use a 1-fan version)[2][10] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Quick-release hotend with a titanium-alloy throat tube; 0.4 mm and 0.6 mm nozzles supplied, 0.25 and 0.8 mm optional; hardened steel[1] | Brass nozzle, 0.4 mm, with a titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 C maximum nozzle temperature[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C maximum hotbed temperature on a PEI spring steel build plate[1] | 100 C max heated bed temperature at 25 C ambient[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | PEI spring steel sheet; ELEGOO notes it is now upgraded to a dual-sided textured PEI + PLA-specific surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling[1] | Manual levelling combined with 121-point auto-levelling[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament run-out sensor and power-loss recovery; no camera, no clog detection, no auto filament unloading[2] |
| Multi-material/multi-color capability or official upgrade path | Up to 16-colour printing with ACE 2 Pro units, sold separately[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Activated carbon filter for odour removal; dual external-circulation cooling fans[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | ELEGOO describes it only as a "Klipper High-Speed Quiet Motherboard" - no board model or MCU is published[2] |
| Total rated power draw | Not documented | 320 W rated power; 24 V output; 110-120 V / 220-240 V input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration supported[1] | Klipper (ELEGOO names the system "Klipper" outright for the Neptune 4 Plus, rather than the ELEGOO OS branding used on the Centauri machines)[2][10] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 4.3-inch colour capacitive touch screen[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicing software, Anycubic app and U-disk; AI spaghetti detection using an in-house algorithm and the 720p camera[1] | Colour capacitive touch UI; ElegooSlicer is recommended, with Orca and Cura also supported[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and U-disk[1] | USB, LAN and Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera, 720p, used for real-time AI anomaly detection[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships 95% pre-assembled; Anycubic claims unbox to print in 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Consumer grades: PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF, PETG-CF, PVA. Engineering grades: ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF[1] | PLA, TPU, PETG, ABS, ASA, Nylon[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode, as low as 45 dB in quiet mode - manufacturer figures with no distance or method stated[1] | Operating sound is published as 65 dB or less - a manufacturer figure with no measuring distance or method given, so it is not comparable with a reviewer's dB reading[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[12] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra S1 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra S1 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO Neptune 4 Plus Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Shopify product JSON (variant prices and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Neptune 4 product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Neptune 4 Max product page (Specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor