3D Printing InfoPrinter comparison
Anycubic Kobra 4 vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 4 comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | Anycubic Kobra 4BEDSLINGER | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | LulzBot |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 4[1] | LulzBot TAZ Pro Long Bed 3D Printer[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 29 May 2026 (Shopify publish date)[3] | Not documented |
| Street price (USD; dated snapshot per entry) | $279.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $379.00 ($320.90 for the EU plug variant)[3] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares its 260 mm cube volume and its exact machine dimensions (455.4 x 445.3 x 461.3 mm) with the Kobra X, so those two cannot be told apart on size. The difference is multicolour: the Kobra X ships with native 4-colour capability, while the Kobra 4 needs an ACE 2 Pro unit for multicolour and drying. The Kobra 4 also has a smaller 3.5-inch screen where the Kobra 3 and S1 use 4.3-inch panels[1][4][5] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[2][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 282 x 582 x 285 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the optional ACE 2 Pro is a separate 368 x 291.5 x 236.5 mm unit[1] | Not documented |
| Net weight (kg) | 9.9 kg for the printer (ACE 2 Pro 3.7 kg); packaged 12.6 kg bare or 17.5 kg as the Combo[1] | Not documented |
| Frame construction & material | Not documented | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry system" - a bed-slinger, not CoreXY[1] | Cartesian bedslinger[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s the default[1] | Not documented |
| Recommended/typical print speed | 300 mm/s default print speed (manufacturer figure)[1] | Not documented |
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Asteroid 285 tool head[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard with 0.25, 0.6 and 0.8 mm optional[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | 290 °C maximum, firmware-limited[2] |
| Stock nozzle size & sizes included in box | Not documented | 1.2 mm GammaMaster steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Blue spring-steel magnetic flex bed system[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 49-point auto-levelling with Z-offset; Anycubic claims levelling repeatability under 0.02 mm and states no manual compensation is needed[1] | BLTouch, 32-point automatic mesh calibration[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament sensor with runout and stripping detection[2] |
| Multi-material/multi-color capability or official upgrade path | Multicolour and active drying both require the separate ACE 2 Pro unit; Anycubic quotes 4 independent brushless feed motors in that unit[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration; a built-in accelerometer drives vibration compensation[1] | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch capacitive touchscreen - smaller than the 4.3-inch panels on the Kobra 3 and S1 series[1][5][7] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer, the Anycubic app and USB; AI spaghetti detection and object skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Anycubic Slicer and the Anycubic app[1] | USB serial; 16 GB flash drive included for standalone printing[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Anycubic claims assembly and first print within 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU 95A - and Anycubic notes TPU 95A cannot be used through the ACE 2 Pro[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode and 45 dB or less in silent print mode - manufacturer figures with no distance or method stated[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] | 1 year standard with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[2] |
| Benchmark print times (source + settings) | Anycubic claims a 14-minute Benchy - a manufacturer figure with no slicer settings published, not an independent measurement[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Anycubic Kobra 4 Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor