3D Printing InfoPrinter comparison
Anycubic Kobra 4 vs ELEGOO Centauri Carbon 2 Combo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 4 comparisonsMore ELEGOO Centauri Carbon 2 Combo comparisons
| Property | Anycubic Kobra 4BEDSLINGER | ELEGOO Centauri Carbon 2 ComboCOREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | ELEGOO |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 4[1] | ELEGOO Centauri Carbon 2 Combo[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 29 May 2026 (Shopify publish date)[3] | Listed on the ELEGOO US store from 9 August 2026 (Shopify publish date)[4] |
| Street price (USD; dated snapshot per entry) | $279.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $379.00 ($320.90 for the EU plug variant)[3] | $399.00 on us.elegoo.com, Aug 2026, against a compare-at price of $449.00[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Shares its 260 mm cube volume and its exact machine dimensions (455.4 x 445.3 x 461.3 mm) with the Kobra X, so those two cannot be told apart on size. The difference is multicolour: the Kobra X ships with native 4-colour capability, while the Kobra 4 needs an ACE 2 Pro unit for multicolour and drying. The Kobra 4 also has a smaller 3.5-inch screen where the Kobra 3 and S1 use 4.3-inch panels[1][5][6] | The Centauri Carbon 2 sold with the CANVAS multicolour unit. Every printing figure matches the bare Centauri Carbon 2; what changes is the body - 500 x 480 x 743 mm and 19.35 kg with CANVAS fitted - and CANVAS capability being listed Yes. Against the first-generation Centauri Carbon: 350 C nozzle rather than 320 C, clog detection added, and a HEPA plus coconut-shell carbon filter stack rather than the nano mineral crystal filter. An ELEGOO x emoji collaboration edition of the same machine is also listed[2][7][8][9] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 256 x 256 x 256 mm; printing platform 260 x 260 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 455.4 x 445.3 x 461.3 mm for the printer; the optional ACE 2 Pro is a separate 368 x 291.5 x 236.5 mm unit[1] | 500 x 480 x 743 mm with the CANVAS unit fitted[2] |
| Net weight (kg) | 9.9 kg for the printer (ACE 2 Pro 3.7 kg); packaged 12.6 kg bare or 17.5 kg as the Combo[1] | 19.35 kg net, 23.8 kg gross[2] |
| Frame construction & material | Not documented | Integrated die-cast aluminium construction (Centauri Carbon platform)[8] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed; the Centauri Carbon 2 uses a HEPA plus granulated coconut-shell activated-carbon filter stack rather than the first generation's nano mineral crystal filter, and adds a smart exhaust grille[7][8] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry system" - a bed-slinger, not CoreXY[1] | CoreXY[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three lead screws with three linear guide rods[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | "Silent Drive (All Axes)"; no driver part number published[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s the default[1] | 500 mm/s or less, with 250 mm/s given as the recommended speed[2] |
| Recommended/typical print speed | 300 mm/s default print speed (manufacturer figure)[1] | 250 mm/s recommended printing speed (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 20000 mm/s2 maximum acceleration, 10000 mm/s2 recommended[1] | 20000 mm/s2 maximum acceleration; default 10000 mm/s2[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion")[1] | Dual-gear direct extruder with one fan[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Hardened-steel nozzle, 0.4 mm standard with 0.25, 0.6 and 0.8 mm optional[1] | Brass-hardened steel nozzle, 0.4 mm, titanium-alloy heat break[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | 350 C claimed max nozzle temperature - 30 C above the first-generation Centauri Carbon[2][8] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 C maximum hotbed temperature on a PEI spring steel build plate[1] | 110 C max heated bed temperature at 25 C ambient[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided spring steel sheet, textured PEI plus a PLA-specific surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 49-point auto-levelling with Z-offset; Anycubic claims levelling repeatability under 0.02 mm and states no manual compensation is needed[1] | 121-point auto-levelling with full-auto calibration[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament run-out sensor, clog detection, auto filament unloading and power-loss recovery[2] |
| Multi-material/multi-color capability or official upgrade path | Multicolour and active drying both require the separate ACE 2 Pro unit; Anycubic quotes 4 independent brushless feed motors in that unit[1] | CANVAS multi-material capability included - the defining difference from the bare Centauri Carbon 2[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | "Powerful Self-Developed Motherboard" is all ELEGOO publishes[2] |
| Total rated power draw | Not documented | 1100 W at 220 V, 350 W at 110 V rated; 24 V output[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS with pressure advance and flow calibration; a built-in accelerometer drives vibration compensation[1] | ELEGOO OS; ElegooSlicer recommended, Orca and Cura supported[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch capacitive touchscreen - smaller than the 4.3-inch panels on the Kobra 3 and S1 series[1][6][10] | 5-inch colour capacitive touch screen (the first-generation Centauri Carbon used a 4.3-inch panel)[2][8] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus Anycubic Slicer, the Anycubic app and USB; AI spaghetti detection and object skip supported[1] | Colour touch UI; LED lighting fitted; STL, OBJ, 3MF and STEP input[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Anycubic Slicer and the Anycubic app[1] | USB and Wi-Fi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Standard HD camera fitted, 720p[1] | Camera fitted[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Anycubic claims assembly and first print within 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU 95A - and Anycubic notes TPU 95A cannot be used through the ACE 2 Pro[1] | Ideal: PLA, PETG, ABS, ASA. Capable: TPU, PC, PA, PET and fibre-reinforced filaments[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 48 dB or less in standard mode and 45 dB or less in silent print mode - manufacturer figures with no distance or method stated[1] | Operating sound published as 45 dB or less - a manufacturer figure with no distance or method stated, and 10 dB below the first-generation Centauri Carbon's published figure[2][8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 12 months on brand-new machines and parts, but ELEGOO's own table excludes a long list of parts from that: PEI plate / build plate / nozzle kit / PTFE tube / heater / thermistor / hot end / packaging / manual / tools carry no warranty at all, and the extruder, extruder kit and printhead kit get 6 months. Certified pre-owned machines carry no warranty[12] |
| Independently Measured Performance | ||
| Benchmark print times (source + settings) | Anycubic claims a 14-minute Benchy - a manufacturer figure with no slicer settings published, not an independent measurement[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO compare-products page, which embeds the full per-model specification JSON for every Neptune, Centauri and OrangeStorm machine us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra 4 Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 Combo Shopify product JSON (price and store publish date) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra X product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- ELEGOO Centauri Carbon 2 product page (Centauri Carbon 2 vs Centauri Carbon side-by-side table) us.elegoo.com · 2026-08 · vendor
- ELEGOO Centauri Carbon product page (full specification table) us.elegoo.com · 2026-08 · vendor
- ELEGOO US store 3D printers collection (current line-up, Aug 2026) us.elegoo.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- ELEGOO Refund & Warranty policy (warranty period table) us.elegoo.com · 2026-08 · vendor