3D Printing InfoPrinter comparison
Anycubic Kobra 3 Max vs QIDI X-Smart 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 3 Max comparisonsMore QIDI X-Smart 3 comparisons
| Property | Anycubic Kobra 3 MaxBEDSLINGER | QIDI X-Smart 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 3 Max[1] | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 19 February 2025 (Shopify publish date)[4] | Not published by QIDI on the pages checked (Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $429.00 with a US plug on store.anycubic.com, Aug 2026, against a compare-at price of $699.00 ($493.00 for the EU plug variant)[4] | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same 420 x 420 x 500 mm build volume as the older Kobra 2 Max, so build volume will not tell them apart - but the Kobra 3 Max is faster (600 mm/s claimed against 500), runs Kobra OS with multi-colour support and a 4.3-inch touchscreen, and is lighter at 19 kg against 21 kg. Its acceleration ceiling is 10000 mm/s2, half the 20000 mm/s2 of the smaller Kobra 3 - a difference the marketing does not lead with[1][5][6] | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[2][7][8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 420 x 420 x 500 mm, which Anycubic states as 88 L[1] | 175 x 180 x 170 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 706 x 640 x 753 mm[1] | 370 x 362 x 397 mm[2] |
| Net weight (kg) | 19 kg[1] | 10.5 kg[2] |
| Frame construction & material | Not documented | QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Anycubic's table gives the construction as "Gantry System" - a bed-slinger, with dual Y-axis motors added to stop layer misalignment on the large moving bed[1] | CoreXY[2][3] |
| Belts (type, width, e.g. Gates?) | Semi-automatic belt tensioning, which Anycubic pairs with motor anti-skip[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum print speed (manufacturer claim), 300 mm/s recommended[1] | <=500 mm/s (manufacturer claim)[2][3] |
| Recommended/typical print speed | 300 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 10000 mm/s2 maximum acceleration - half the ceiling of the smaller Kobra 3, because of the moving mass[1][6] | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 30 mm3/s extruder flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive ("short distance extrusion") with a quick-release hotend[1] | Direct-drive extruder, single, 1.75 mm filament[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | 300 C quick-release hotend with an aerospace-grade ceramic composite throat tube; 0.4 mm standard nozzle, expandable to 0.6 and 0.8 mm[1] | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 C maximum nozzle temperature[1] | <=300 °C claimed[2][3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 90 C maximum hotbed temperature on a PEI spring steel plate - 20 C below the smaller Kobra 3[1][6] | <=120 °C claimed[2][3] |
| Heat-up time to 60°C (measured preferred) | Anycubic claims the ultra-large hotbed heats up in 125 s; no target temperature is stated for that figure and it is a manufacturer claim, not a measurement[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic RF plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | LeviQ 3.0 auto-levelling with Z-offset and area levelling[1] | 16-point automatic bed levelling per QIDI's US page; probe technology not named[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 16 points (QIDI's US page). Not verified against firmware[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection with auto resume, entanglement detection and power-loss resume[1] | Filament detection fitted; type and location not published[2] |
| Multi-material/multi-color capability or official upgrade path | Supports 4- or 8-colour printing with ACE Pro units[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[2] |
| Total rated power draw | Not documented | 350 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Kobra OS; Anycubic Slicer Next is built on the open-source Orca slicer[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | 4.3-inch touchscreen[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Touchscreen plus slicer, Anycubic app and USB (print only); AI spaghetti detection and object skip supported[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Printer UI, slicing software, Anycubic app and USB drive (print only)[1] | Wi-Fi and USB. No Ethernet listed for this model[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU (TPU is not compatible with the ACE Pro)[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 60 dB or less in standard mode - a manufacturer figure with no distance or method stated; markedly higher than the 46-48 dB Anycubic claims for the Kobra S1 and Kobra 4[1][9][10] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[11] | 1-year coverage (QIDI standard store terms)[12] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 3 Max product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- Anycubic Kobra 3 Max Shopify product JSON (variant prices and store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 3 Combo product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Anycubic Kobra S1 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor